Cart 2 india

Specification
Brand : MroMax
BulletPoint1 : ✅【DIMENSION】- Thread Size: M3; Thread pitch : 0.5mm / 0.02 "; Height: 4mm / 0.16 "; Outer Diameter: 5mm / 0.20 "
BulletPoint2 : ✅【Well MADE AND QUALITY】- These female thread brass knurled threaded insert embedment nuts are made of durable brass. High strength without deformation, abrasion and corrosion resistance and with beautiful and practical
BulletPoint3 : ✅【STRANDARD AND COMPLETE THREAD】- Deep thread, neat and clean, not easy to strip during rotation, stable and reliable. Convenient operation, good texture, greatly improve your work efficiency
BulletPoint4 : ✅【APPLICATION】- These heatset inserts can be widely used on the injection moulding for tightly fixing. Can be installed by ultrasonic or heat into thread tapered hole, or molded in during injection. Also apply to circuit board assembly and in the field of electronics. The plastic is formed around the brass insert. It would be better to put something in the threads to keep plastic from melting into the center. Using a normal soldering iron, you could easily set them into 10D printed holes.
BulletPoint5 : ✅【PACKAGE CONTENT】- 20 x Knurl Thread Inserts Nuts
Color : Gold
DriveSystem : Spline
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier1 : 887772889664
ExternallyAssignedProductIdentifier2 : 0887772889664
FinishType : Brass,Gold
GradeRating : industrial
ItemName : MroMax M3 Knurled Insert Nuts M3x4x5mm, Female Thread Brass Knurled Threaded Insert Embedment Nuts Metric, Thru-Threaded Pressed Fit into Holes for 3D Printing Injection Molding Gold 20Pcs
ItemPackageDimensions_Height : 9.8 centimeters
ItemPackageDimensions_Length : 0.9 centimeters
ItemPackageDimensions_Width : 8.8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : MroMax
Material : Brass
MeasurementSystem : Inch
MetalType : Steel/iron with zinc coating
MetalType1 : Copper
MetalType2 : Iron
MetalType3 : Brass
ModelNumber : MRO1900910N-0010
NumberOfItems : 20
NumberOfPieces : 25
PartNumber : MRO1900910N-0010
ProductDescription : ★MroMax 20 Pcs Female Thread Brass Knurled Threaded Insert Embedment Nuts, Embed Parts, Pressed Fit into Holes for 7D Prints and More Projects

★【Description】
☁ These Knurl Thread Insert Nut can be widely used on the injection moulding for tightly fixing.
☁Can be installed by ultrasonic or heat into blind hole, or molded in during injection.
☁No need to counterbore or countersink the boss hole since the insert has guide pilot.
☁Made of Copper material, good thermal conductivity and heat resistance.

★【Specification】
☁Product Name: Knurl Thread Inserts Nuts
☁Brand: MroMax
☁Material: Copper
☁Thread Size: M3
☁Thread pitch : 0.5mm / 0.02 "
☁Height: 4mm / 0.16 "
☁Outer Diameter: 5mm / 0.20 "
☁Main Color: Gold Tone
☁Thread specification: Imperial thread

★【Package Content】
☁20 x Knurl Thread Inserts Nuts
ProductSiteLaunchDate : 2019-10-15T06:47:16.786Z
Size : 20PCS
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161700
Wattage : 1000 watts