Cart 2 india

Specification
Brand : Eujgoov
BulletPoint1 : USAGE: When you fit the wire screw set in the screw hole of the workpiece of aluminum alloy and other materials, the insert can form a high‑strength, wear‑resistant, high‑accuracy standard female thread
BulletPoint2 : SCOPE OF APPLICATION: Repairing the threaded hole in a cost‑effective manner. Threaded insert can be used as a repair method when a thread error occurs or a damaged female threaded hole is repaired
BulletPoint3 : PRACTICAL: Male female thread inserts can be used to convert between metric and inch thread holes, convenient and fast
BulletPoint4 : QUALITY ASSURANCE: Using high‑strength, high‑accuracy ‑shaped cross‑section steel wire. Wire thread inserts are also called threaded sheaths, stainless steel threaded sleeves, wire sleeves, which is a new type of female threaded fasteners
BulletPoint5 : WIDE APPLICATIONS: Used to low‑strength engineering materials such as aluminum alloy, zinc alloy, alloy, copper, plastic, engineering plastics, etc., which can significantly improve thread strength and wear proof
Color : 2D
DriveSystem : External Hex
ExteriorFinish : Zinc
FinishType : Finish
ItemName : 100Pcs Thread Inserts, M2.5x0.45 Male Female Reducing Nut Repair Tool Stainless Steel Fastener(2D)
ItemPackageDimensions_Height : 5.7 centimeters
ItemPackageDimensions_Length : 0.7 centimeters
ItemPackageDimensions_Width : 4.1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : hardware-nut-inserts
Manufacturer : Eujgoov
MetalType : Carbon Steel
MetalType1 : Zinc
MetalType2 : Stainless Steel
MetalType3 : Aluminum
MetalType4 : Alloy Steel
MetalType5 : Copper
ModelNumber : GOTOTOP5a1em9i6d71058-03
NumberOfItems : 1
NumberOfPieces : 20
PartNumber : PFU53go4esu267kp598213
ProductDescription : Specification:
Item Type: Thread Inserts
Material: SUS304
Model: M2.5x0.45
Thread Specification: M2.5x0.45 (mm)
Outside Diameter Before Installation: Approx. 3.2 ~ 3.5mm / 0.1 ~ 0.1in
Diameter of Drilling Drill Bit for Installation: Approx. 2.6mm / 0.1in
1D/1.5D/2D/2.5D/3D:
Length After Installation: Approx. 2.5mm / 0.1in
3.8mm / 0.1in
5.0mm / 0.2in
6.3mm / 0.2in
7.5mm / 0.3in
Number of Turns Before Installation: 2.6/5.9/8.2/10.5/12.8
Thread Protective Sleeve Model Specification Description: For Example: M3x0.5X1.5D, which means that after the screw set is completed, the female thread is M3, the pitch is 0.5, and the length is 1.5D (length refers to 1.5 times the diameter, that is, 1.5x3=4.5mm ), the length here refers to the length after installation.

How to Use:
1. Drilling
2. Tapping
3. Installation
4. Remove the handle (break off the mounting handle)
5. Unscrew

Package List:
100 x Thread Inserts

ProductSiteLaunchDate : 2022-05-26T00:00:00.000Z
Size : Normal
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31161500