Cart 2 india

Specification
Brand : Weatherhead
BulletPoint1 : Package Dimensions: 5.08 L x 1.016H x2.54W centimeters
BulletPoint2 : For use in low-pressure air, fuel, and oil applications
BulletPoint3 : Steel for durability and resistance to rupture under high pressure
BulletPoint4 : Package Weight : 0.01 pounds
BulletPoint5 : 【GUARANTEE AND SERVICE】The pilot tube with fittings comes with one year guarantee. Within one year, you can contact us for replacement or refund if the pilot tube and compression fittings have some problems. We will reply you within 24 hours.
CustomerPackageType : Standard Packaging
ExteriorFinish : Machined
ExternallyAssignedProductIdentifier1 : 696738283527
ExternallyAssignedProductIdentifier2 : 0696738283527
FinishType : Brass
FitType : Vehicle Specific
GpsrSafetyAttestation : 1
GradeRating : Industrial
IncludedComponents : Nut
ItemLength : 36 inches
ItemName : Eaton Weatherhead 105X4 Steel Inverted Flare Brass Fitting, Nut, 1/4" Tube OD
ItemPackageDimensions_Height : 1.016 centimeters
ItemPackageDimensions_Length : 5.08 centimeters
ItemPackageDimensions_Width : 2.54 centimeters
ItemPackageQuantity : 1
ItemShape : Nut
ItemTypeKeyword : compression-fitting-nuts
Manufacturer : Eaton
Material : Steel
MeasurementSystem : Inch
MetalType1 : Stainless Steel
MetalType2 : Alloy Steel
MetalType3 : Brass
ModelName : Nut
ModelNumber : 105X4
NumberOfItems : 1
PackageLevel : unit
PartNumber : 105X4
ProductDescription :

Package Include:
1Pcs × 36 inch flex tube line(1/4" OD)
2Pcs × Compression sleeves
2Pcs × M10*1 female thread
2Pcs × M10*1 male thread

Specifications:
>Material: Stainless steel & solid brass
>Size: The diameter of the aluminum tube is 1/4". The length is 36 inches.
>Function: The most common reasons for replacing this part is if the burner will not light.

Usage: This tubing can be used with most pilot and valve connection (If olive is loose can use wrench to fit it or glued), propane gas & natural gas pilot burner assembly.

Steps of replace Pilot Assembly:
1.Unthread the compression nut to detach the pilot gas tube from the gas valve
2.Release the thermal couple from the valve
3.Unthread the nut to release the main burner tube from the valve and unthread the two mounting screws securing the burner
4.Unthread the screws securing the pilot assembly
5.Prepare the new pilot assembly for installation unwind
6.Unthread the nut and remove the ferrule
7.Slide the nut onto the new tube and then align the ferrule
8.Insert the tube into the pilot (confirm the pilot orifice is in place); thread and tighten the nut
9.Install pilot assembly back.

ProductSiteLaunchDate : 2012-02-21T08:00:01.000Z
Size : 1/4"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161700