Cart 2 india

Specification
AgeRangeDescription : adult
Brand : easytooly
BulletPoint1 : Material: 316 Stainless Steel,
BulletPoint2 : Straight fittings are machined from bar stock and shaped fittings from forgings.
BulletPoint3 : Thread Specifications: Pressure Rating for Pipe End Thread
BulletPoint4 : Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction
BulletPoint5 : For inert gas, reactive, flammable, oxidizing and gas mixtures, Purity max. 6.0.
BulletPoint6 : Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.
Color : One Color
ConnectorType : Tube Od
Department : Unisex Adult
ExteriorFinish : Brass
ExternallyAssignedProductIdentifier : 8383787713175
ExternallyAssignedProductIdentifier1 : 719852955375
ExternallyAssignedProductIdentifier2 : 0719852955375
ExternallyAssignedProductIdentifier3 : 00719852955375
GpsrSafetyAttestation : 1
IncludedComponents : Replacement Part
ItemDisplayDimensions_Length : 4.5 inches
ItemDisplayWeight : 0.5 pounds
ItemName : 316 Stainless Steel Cross Union 4-Way Double Ferrule Compression Fitting 30MPa 1/8" 1/4" 3/8" 1/2" 6 8 10 12mm Replacement(0.25 in)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemShape : Sleeve
ItemTypeKeyword : compression-fitting-nuts
Manufacturer : easytooly
Material : Lead,Plastic,Brass,Metals
MetalType : Stainless Steel
ModelName : easytooly
ModelNumber : easytooly
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : easytooly
ProductDescription : 316 Stainless Steel CROSS UNION 4-Way Double Ferrule Compression Fitting 30MPa 1/8" 1/4" 3/8" 1/2" 6 8 10 12mm Replacement

Material: 316 Stainless Steel,
Straight fittings are machined from bar stock and shaped fittings from forgings.
Thread Specifications: Pressure Rating for Pipe End Thread
Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction

Packing: 1PC of 4-Way Double Ferrule Compression Fitting

Features
1. Sizes range from 1/16" to 1" and 3 mm to 25 mm.
2. Precision machined components ensure deformation of the ferrules and tubing.
3. Hardened threads with smooth finish avoid galling and help to extend the fitting service life.
4. Female nut threads are silver-plated to reduce the friction against the body threads.
5. Radius junction design for elbows provides smooth flow path.
6. Every fitting is marked with thread type, size and material.
7. Assembled easily without the requirement of any special tools.
8. Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.
9. Contribute to productivity improvement because of machined surfaces on the inner finishing.

Application
For inert gas, reactive, flammable, oxidizing and gas mixtures, Purity max. 6.0.
Tube Fittings are appropriate for Gas Systems, but the implementation of certain standards mentioned below should be adhered to just as in other systems.
1. Tubing hardness must be less than that of the ferrules.
2. Tubing should be away of outside imperfections, defects and round in shape.
3. Tubing ends must be cut squarely and perpendicular to the center-line of the tubing.
4. After the tubing is cut it must be deburred on both the inside and outside with a fully sharpened deburring tool.

1. Firmly insert the tubing until it bottoms in the
ProductSiteLaunchDate : 2024-12-03T12:12:41.702Z
Size : 0.25 in
StreetDate : 2021-10-12T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700