Cart 2 india

Specification
Brand : easytooly
BulletPoint1 : Size: Tube LOK to PU hose ID
BulletPoint2 : Material: 316 Stainless Steel
BulletPoint3 : Threads meets the requirement of ASME/ANSI B1.20.1 to ensure maximum thread engagement.
BulletPoint4 : The hardened threads with smooth finishing avoid galling and help to extend the fitting service life.
BulletPoint5 : Working pressures are higher than the traditional piping class.
BulletPoint6 : Packing List: Hexagon Plastic Screw Caps Nut Covers X10
Color : One Color
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 8383889112173
ItemName : 1PC 316 Stainless Steel PU Hose Nipple Pagoda Connector Compression Fitting Tube LOK to PU hose ID(8 MM*6MM)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : compression-fitting-nuts
Manufacturer : easytooly
ModelName : easytooly
ModelNumber : easytooly
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : easytooly
ProductDescription : 1PC 316 Stainless Steel PU Hose Nipple Pagoda Connector Compression Fitting Tube LOK to PU hose ID

Features
Sizes range from 1/16" to 1" and 3 mm to 25 mm.
Precision machined components ensure deformation of the ferrules and tubing.
Hardened threads with smooth finish avoid galling and help to extend the fitting service life.
Female nut threads are silver-plated to reduce the friction against the body threads.
Radius junction design for elbows provides smooth flow path.
Every fitting is marked with thread type, size and material.
Assembled easily without the requirement of any special tools.
Provide a reliable, leak proof seal under severe conditions such as temperature cycling, vibration and pulsation.
Contribute to productivity improvement because of machined surfaces on the inner finishing.
Material: 316 Stainless Steel

Pressure Rating for Pipe End Thread
Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation Instruction
1. Firmly insert the tubing until it bottoms in the fitting body.
2. Finger tighten the nut.
3. Mark the nut at the 6 o'clock position, with pencil or scribe.
4. Hold the body with a backup wrench, or vice, then tighten nut.
5. 1-1/4 turns to the 9 o'clock position.
6. The above applies to all fittings from 1/4"to 1"(6mm to 25mm).
7. Fittings from 1/16" to 3/16" (3mm to 4mm), only 3/4 turn is required.
ProductSiteLaunchDate : 2025-03-05T22:28:46.731Z
Size : 8 MM*6MM
UnspscCode : 40141700