Cart 2 india

Specification
Brand : Abrasive Mechanics
BulletPoint : K10-602
BulletPoint1 : Replace that cumbersome sandblaster hose and nozzle.
BulletPoint2 : Great for glass etching and light sandblasting. Please Note: This is not a regular size sandblaster hose and is meant to be smaller for folks blasting light duty items requiring lower volume such as inside a sandblast cabinet. See details in description prior to ordering.
BulletPoint3 : Includes flexibe hose, steel valve, conversion kit, nozzle and ceramic tip.
BulletPoint4 : 9 foot long-lasting, abrasive resistant sandblaster hose.
BulletPoint5 : Long lasting nozzle gun for pressure pot sandblasters only.
BulletPoint6 : Adjustable spray pattern
Color : Green
ExteriorFinish : Brass
ExteriorFinish1 : Stainless Steel
ExteriorFinish2 : Brass
ExternallyAssignedProductIdentifier1 : 0722512439719
ExternallyAssignedProductIdentifier2 : 722512439719
GpsrSafetyAttestation : 1
IncludedComponents : Rubber Gasket
ItemDisplayDimensions_Length : 18 centimeters
ItemDisplayWeight : 0.1 kilograms
ItemName : Complete Sandblaster Nozzle Gun with Hose & Conversion Kit, All Steel
ItemPackageDimensions_Height : 25.8 centimeters
ItemPackageDimensions_Length : 2.8 centimeters
ItemPackageDimensions_Width : 7.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : watering-nozzles
Manufacturer : Abrasive Mechanics
Material : Ceramic
Material1 : Brass
Material2 : Chrome
ModelName : hose 002
ModelNumber : .60-60A
NumberOfItems : 1
NumberOfPorts : 2
PackageLevel : unit
PartNumber : .60-60A
ProductDescription : Please Note: This is not a regular size sandblaster hose. It is meant to be smaller for folks blasting light duty items requiring lower volume such as inside a sandblast cabinet. It also uses the smaller Type 2 nozzle which is more prominently used in non-commercial sandblasting systems such as the Clarke and Harbor Freight units. Please read the full description below before ordering to ensure it is what's desired. Thank you

Most pressure pot sandblasters contain a heavy, thick hose which can be quite cumbersome, especially for light sandblasting or glass etching. This nozzle, hose and conversion kit allows you to easily convert your old system to be much more maneuverable and easy to work with!

Simply remove the hose clamp from the bottom tee and slip this reducer hose onto the old 1/2" ID outlet. This reducer converts your old 1/2" ID hose to a efficient 1/4" ID hose. The 1/4" clear hose is not your typical cheap tube found at hardware stores. It is a quality long-lasting, abrasive resistant hose suitable for sandblasting and rated at a working pressure of 67 PSI @ 70°F and a burst pressure of 201 PSI @ 70°F. Every metal part that the abrasive comes in contain with is made of steel for long-lasting durability. Parts are a mixture of stainless steel and galvanized steel to prevent rust.
ProductSiteLaunchDate : 2016-01-02T08:00:00.000Z
Size : 18 x 8 x 13 cm
Style : Music
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 40142000
ValveType : off