Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
2pcs Wireless Module NRF24L01+PA+LNA in Antistatic Foam Arduino Compatible with AntennaSpecifications:The nRF24L01+ is a 2.4GHz ISM band transceiverRange: 800+ meters line of sightIncludes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier)A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V.The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.Auto-acknowledge and auto-retransmit abilitiesWeight: 13.28 g (0.468 oz)Board dimensions, excluding pins: 15.5mm (0.61/) width x 40.7mm (1.6/) length x 12.2mm (0.48/) heightDimensions of antenna, when angled at 90 degrees: 87mm (3.43/) height x 9.5mm (0.37/) diameterPackage Including2 * Wireless Module2 * Antenna
Features
1) The nRF24L01+ is a 2.4GHz ISM band transceiver; Auto-acknowledge and auto-retransmit abilities
2) Range: 800+ meters line of sight, Weight: 13.28 g (0.468 oz)
3) The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
4) More detail:http: //www.nordicsemi.com/kor/Products/2.4GHz-RF/nRF24L01P
5) PLS NOTE: Some sellers, such as Electronics Foundry, sell our product without getting any authorization from MakerFocus. We do not know where their products are from, and we can't ensure the quality. If you think it is fake (our package is a MakerFocus box as the picture shows), please report to Amazon. And we will not be responsible for others' product!
Specification
Binding : Electronics
Brand : MakerFocus
EAN : 0190657860567
Label : Makerfocus
Manufacturer : Makerfocus
PackageDimensions_Weight : 0.13 pounds
PackageDimensions : L:3.80 X W:3.50 X H:0.90
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COMPONENT
Publisher : Makerfocus
Studio : Makerfocus
Title : Makerfocus 2pcs Wireless Module NRF24L01+PA+LNA in Antistatic Foam Arduino Compatible with Antenna
2pcs Wireless Module NRF24L01+PA+LNA in Antistatic Foam Arduino Compatible with AntennaSpecifications:The nRF24L01+ is a 2.4GHz ISM band transceiverRange: 800+ meters line of sightIncludes on board support components and the RFX2401C which is the PA (Power Amplifier) and LNA (Low-Noise Amplifier)A host microcontroller can communicate and configure the nRF24L01+ over a 4-pin Serial Peripheral Interface (SPI). The configuration registers are accessible through the SPI connection. Configurable parameters include frequency channel (125 selectable channels), output power, and data rate (data rates: 250kbps, 1Mbps, and 2Mbps).The on chip voltage regulator accepts supply voltages from 1.9 to 3.6V.The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.Internal filtering results in high margins of meeting RF regulatory standards. The module's radio uses Gaussian Frequency-Shift Keying (GFSK) modulation as well as fast Automatic Gain Control (AGC).The module includes an Interrupt Request (IRQ) pin which can be used to wake the host microcontroller, (ex: Arduino), from sleep when the module receives a transmission providing great power conservation in battery devices.Auto-acknowledge and auto-retransmit abilitiesWeight: 13.28 g (0.468 oz)Board dimensions, excluding pins: 15.5mm (0.61/) width x 40.7mm (1.6/) length x 12.2mm (0.48/) heightDimensions of antenna, when angled at 90 degrees: 87mm (3.43/) height x 9.5mm (0.37/) diameterPackage Including2 * Wireless Module2 * Antenna
Features
1) The nRF24L01+ is a 2.4GHz ISM band transceiver; Auto-acknowledge and auto-retransmit abilities
2) Range: 800+ meters line of sight, Weight: 13.28 g (0.468 oz)
3) The module has 5V tolerant inputs which allows for direct connection of SPI pins to the Arduino.
4) More detail:http: //www.nordicsemi.com/kor/Products/2.4GHz-RF/nRF24L01P
5) PLS NOTE: Some sellers, such as Electronics Foundry, sell our product without getting any authorization from MakerFocus. We do not know where their products are from, and we can't ensure the quality. If you think it is fake (our package is a MakerFocus box as the picture shows), please report to Amazon. And we will not be responsible for others' product!
Specification
Binding : Electronics
Brand : MakerFocus
EAN : 0190657860567
Label : Makerfocus
Manufacturer : Makerfocus
PackageDimensions_Weight : 0.13 pounds
PackageDimensions : L:3.80 X W:3.50 X H:0.90
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COMPONENT
Publisher : Makerfocus
Studio : Makerfocus
Title : Makerfocus 2pcs Wireless Module NRF24L01+PA+LNA in Antistatic Foam Arduino Compatible with Antenna
