Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger ModuleDescription:Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery.And still retains the input voltage wiring pads, can be very convenient DIY.Note: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.Note: The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B+ B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge.+ MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full. Features:Input voltage: 5VCharging cut-off voltage: 4.2V ± 1%Maximum charge current: 1000mABattery over-discharge protection voltage: 2.5VBattery overcurrent protection current: 3ABoard size: 2.6 * 1.7CMPackage Including10 * TP4056 Charging Module
Features
1) HOW TO USE THIS MODULE? PLS refer to this Instruction video: https://www.youtube.com/watch?v=aND0j2Y2IkM
2) Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery,And still retains the input voltage wiring pads, can be very convenient DIY.Charging cut-off voltage: 4.2V 1%;Maximum charge current: 1000mA.
3) Input voltage: 5V;Battery over-discharge protection voltage:2.5V;Batteryovercurrent protection current: 3A.
4) Connect the battery to the B + B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full.
5) The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.
Specification
Binding : Electronics
Brand : MakerFocus
Color : Charging Module
EAN : 0190033766643
Label : Makerfocus
Manufacturer : Makerfocus
PackageDimensions_Weight : 0.07 pounds
PackageDimensions : L:4.06 X W:2.87 X H:1.02
ProductGroup : PC Accessory
ProductTypeName : NETWORKING_DEVICE
Publisher : Makerfocus
Studio : Makerfocus
Title : Makerfocus 10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger Module (Charging Module)
10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger ModuleDescription:Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery.And still retains the input voltage wiring pads, can be very convenient DIY.Note: The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.Note: The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B+ B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge.+ MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full. Features:Input voltage: 5VCharging cut-off voltage: 4.2V ± 1%Maximum charge current: 1000mABattery over-discharge protection voltage: 2.5VBattery overcurrent protection current: 3ABoard size: 2.6 * 1.7CMPackage Including10 * TP4056 Charging Module
Features
1) HOW TO USE THIS MODULE? PLS refer to this Instruction video: https://www.youtube.com/watch?v=aND0j2Y2IkM
2) Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery,And still retains the input voltage wiring pads, can be very convenient DIY.Charging cut-off voltage: 4.2V 1%;Maximum charge current: 1000mA.
3) Input voltage: 5V;Battery over-discharge protection voltage:2.5V;Batteryovercurrent protection current: 3A.
4) Connect the battery to the B + B-, inserted into the USB female mobilephone charger, the red light is being charged, the green light to full.
5) The charge should disconnect the load OUT terminal on the positive and negative can not be wrong, please according to specifications, otherwise it will damage directly.
Specification
Binding : Electronics
Brand : MakerFocus
Color : Charging Module
EAN : 0190033766643
Label : Makerfocus
Manufacturer : Makerfocus
PackageDimensions_Weight : 0.07 pounds
PackageDimensions : L:4.06 X W:2.87 X H:1.02
ProductGroup : PC Accessory
ProductTypeName : NETWORKING_DEVICE
Publisher : Makerfocus
Studio : Makerfocus
Title : Makerfocus 10pcs TP4056 Charging Module 5V Micro USB 1A 18650 Lithium Battery Charging Board with Protection Charger Module (Charging Module)
