Cart 2 india

Specification
Brand : Fabater
BulletPoint1 : SIMPLE OPERATION: Plug the network cable with the crystal head into the RJ11 or RJ45 interface of the transmitter; Tap the SCAN key on the transmitter to enable the line hunting function. Press and hold the receiver to start line hunting. When you hear a beep , indicate that the target cable is found.
BulletPoint2 : EASY TO JUDGE: Tap the transmitter TEST key to open the line alignment function; Based on the line sequence indicator light on the transmitter and receiver, the characteristics of line access, short circuit, open circuit and cross are determined.
BulletPoint3 : WITH INDICATOR LIGHT: When the measurement wire is on and off, plug the RJ11 crocodile clamp adapter cable into the RJ11 interface of the transmitter, and clamp the line to be tested with the red and black clips respectively. If the line is on, the transmitter line sequence light 1 indicator flashes. Line sequence 1 indicator light, red crocodile clip is negative, black crocodile clip is positive; Line sequence 3 indicator light, red crocodile clip is positive, black crocodile clip is negative.
BulletPoint4 : APPLICABLE WIRES: Wire finder is suitable for RJ45 network cable interface, RJ11 telephone line interface, dual core telephone line can be transferred by crocodile clamp cable. Line sequence 1 indicator light, red crocodile clip is negative, black crocodile clip is positive; Line sequence 3 indicator light, red crocodile clip is positive, black crocodile clip is negative.
BulletPoint5 : FLEXIBLE AND PRACTICAL: Cable finder adopt split design, can be integrated into one, easy to operate, both ends of the split can be remote searching or line.
IncludedComponents : No
ItemName : Wire Tester RJ45 RJ11 Cable Tracker Line Finder Multifunction Wire Tracker Ethernet LAN Network Cat5 Cat6 for Cable Collation, Telephone Line Test, Wire Locator
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 19 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemTypeKeyword : network-and-cable-testers
Manufacturer : Fabater
MeasurementAccuracy : 0.1mm
ModelName : Fabater48sfqcgx0w
ModelNumber : Fabater48sfqcgx0w
NumberOfItems : 1
PartNumber : Fabater48sfqcgx0w
ProductDescription : 1. SIMPLE OPERATION: Plug the network cable with the crystal head into the RJ11 or RJ45 interface of the transmitter; Tap the SCAN key on the transmitter to enable the line hunting function. Press and hold the receiver to start line hunting. When you hear a beep , indicate that the target cable is found
2. EASY TO JUDGE: Tap the transmitter TEST key to open the line alignment function; Based on the line sequence indicator light on the transmitter and receiver, the characteristics of line access, short circuit, open circuit and cross are determined
3. WITH INDICATOR LIGHT: When the measurement wire is on and off, plug the RJ11 crocodile clamp adapter cable into the RJ11 interface of the transmitter, and clamp the line to be tested with the red and black clips respectively. If the line is on, the transmitter line sequence light 1 indicator flashes.
4. APPLICABLE WIRES: Wire finder is suitable for RJ45 network cable interface, RJ11 telephone line interface, dual core telephone line can be transferred by crocodile clamp cable

Spec:
Item Type: Wire Finder
Material: ABS
Adjustable Sensitivity: Within 0-5cm
Flashlight: Receiver with illumination
Display: LED indicator light
Output Level: About 5Vp-p
Maximum Working Current: Transmitter: About ≤60mA; Receiver: About ≤80mA
Transmission Distance: About 3km
Battery: 2 x 6F22 9V(not included)

How to Use:
Unpack and ready to use

Package List:
1 x Transmitter
1 x Receiver
1 x Crocodile Clip
1 x Ethernet Cable
1 x Carrying Case
1 x User Manual

ProductSiteLaunchDate : 2024-09-02T08:57:03.249Z
UnspscCode : 43222600