Cart 2 india

Specification
Brand : OWL
BulletPoint1 : Silicon ZOOM 2 MM Test Kit (850nm only; ST connector)
BulletPoint2 : Silicon ZOOM 2 MM Test Kit
BulletPoint3 : (850nm only; ST connector)
BulletPoint4 : Economical option for quick attenuation and loss testing of both multimode networks
BulletPoint5 : Easy-to-read 4-digit 7-segment LCD display
ItemName : OWL KIT-Z2S-D285st Test Kit Silicon ZOOM II & Dual OWL 850
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemTypeKeyword : network-and-cable-testers
Manufacturer : Optical Wavelength Laboratory
ModelName : KIT-Z2S-D285st
PartNumber : KIT-Z2S-D285st
PowerSourceType : Corded Electric
ProductDescription : OWL KIT-Z2S-D285st Silicon ZOOM 2 MM Test Kit Easy-to-read 4-digit 7-segment LCD display Economical option for quick attenuation and loss testing of multimode networks at 850nm Store reference values for calibrated wavelengths Intuitive 2-button interface on both units and On-screen wavelength, measurement units, and low battery indicatorThe Silicon ZOOM II / Dual OWL 850 Test Kit is ideal for LAN managers and installers who need to do simple attenuation tests on their multimode networks.The Silicon ZOOM II (Zeroed Output Optical Meter) is an economical fiber optic power meter designed to provide accurate testing of multimode fiber cables at 650, 850, 980nm wavelength. The 4-digit 7-segment LCD display shows power readings with a resolution of 0.01dB, power units in dBm, dB, or uW, and battery power level. The Silicon ZOOM II comes configured with a 2.5mm universal port for connection to SC, ST, and other connector types that have a 2.5mm ferrule.The Dual OWL 850 is an 850nm NIST traceable multimode light source. Its 850nm output is temperature-stabilized for accurate measurements. The Dual OWL 850 has two connector options: ST or SC.ApplicationsBelow is a list of test and measurement applications that can be performed using the Silicon ZOOM 2 optical power meter. The procedure for each one of these applications is covered in detail in this manual.Active Equipment Optical Power Measurements. Active equipment should be measured periodically for correct power levels. The transmitters in this equipment have a known power value. The Silicon ZOOM 2 can be directly attached to this equipment via a patch cord to check whether the transmitter is within the manufacturer's specified power range.Fiber Continuity Testing. Continuity can be measured with the Silicon ZOOM 2 by placing a calibrated light source on one end of the fiber and the Silicon ZOOM 2 on the other end. This is also a simple way to measure th
ProductSiteLaunchDate : 2016-10-18T16:39:49.995Z
Style : Simple
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 41113600