Cart 2 india

Specification
Brand : Garosa
BulletPoint1 : [Designed for Efficient Testing] Test the wire circuit state of network cable, telephone cable for open, short, cross, etc.
BulletPoint2 : [Rapid Results] Adopt automatic scan model for quick and testing outcomes.
BulletPoint3 : [Effective Fault Detection] Identify wrong connections, short circuits, and open circuits easily for efficient troubleshooting.
BulletPoint4 : [Portable and Versatile] Detachable section for testing in various locations, making it ideal for different cable runs.
BulletPoint5 : [ Performance] Suitable for testing both rj45 ethernet and rj11 cables with accuracy and reliability.
IncludedComponents : No
ItemName : Network Cable Tester RJ45 and RJ11, Rapid Test, Suitable for Home and Outdoor Use, Blue
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 15 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemTypeKeyword : network-and-cable-testers
Manufacturer : Garosa
MeasurementAccuracy : 0.1mm
ModelName : Garosa6edgkbntuv
ModelNumber : Garosa6edgkbntuv
NumberOfItems : 1
PartNumber : Garosa6edgkbntuv
ProductDescription : Specification:
Detected Cable type: RJ11,RJ45
Power supply: 9V laminated battery(Not included)
Color: Blue
Size: 9.7*10.3*2.8cm/3.8*4.1*1.1in
Weight: Approx.116g/4.1oz
Instructions:
1. Testing double twisted cables 1,2,3,4,5,6,7,8 and G corresponding ,and tell users which exact line is on wrong circuit
2. Switch ON is the normal test speed, S is the rapid test speed, and OFF is Turn off the Tester
3.turn on the tester ,insert the line connector into main tester and remote control .Then the indication lights(1 to 8 and G) will flash

If the connection is not normal, it will be displayed as follows:
1.When there is a network cable such as NO. 3 cable is open circuit, the main tester and remote test end NO.3 lights is not on.
2.When several cables are open circuit, several cables are not on. When less than two cables are connected, the lights are not on.
3.When the two ends of network cables are in disorder, for example, cable 2 and 4 are in disorder, it is shown as follows:
Main tester unchanged: 1-2-3-4-5-6-7-8-G
Remote tester: 1-4-3-2-5-6-7-8-G
4. When there are two wires short circuits , the main tester does not light up, while the remote test end shows that both of the two line lights of short circuit are dim. If there are more than 3 (including 3) short circuits, all the lights of several wires Numbers of short circuit will not light up

Package list:
1 x Network Cable Tester(Battery not included)

Note:
Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.

ProductSiteLaunchDate : 2024-07-07T17:06:42.012Z