Cart 2 india

Specification
Brand : Dioche
BulletPoint1 : [HIGH ACCURACY MEASUREMENTS] - The fiber optical power meter ensures precise readings with high accuracy and quick response, making it for professional use.
BulletPoint2 : [ AND WEAR-RESISTANT] - Built to withstand shocks and wear, this power meter is incredibly strong and , ensuring long-lasting performance.
BulletPoint3 : [VERSATILE CONNECTORS AND WAVELENGTHS] - With three connector options and the ability to measure 7 different wavelengths, this power meter is compatible with a wide range of optical cables.
BulletPoint4 : [WIDE TEMPERATURE RANGE] - This power meter can handle extreme temperatures from -10℃ to +60℃, allowing it to work under various conditions.
BulletPoint5 : [BATTERY POWERED AND EASY TO SWITCH] - Powered by 3 AA batteries (not included), this power meter offers convenient operation and easy battery replacement.
ExternallyAssignedProductIdentifier : 7628184216463
IncludedComponents : No
ItemName : Advanced Fiber Optical Power Meter 800-1700nm -703db, Quick Response Optical Tester with Linear Display, SCFCST Connector, Suitable for Laboratory Testing (Optical Power Meter)
ItemPackageDimensions_Height : 5 centimeters
ItemPackageDimensions_Length : 23 centimeters
ItemPackageDimensions_Width : 12 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : network-and-cable-testers
Manufacturer : Dioche
MeasurementAccuracy : 0.1mm
ModelName : Diochez7i4oad9xf-11
ModelNumber : Diochez7i4oad9xf-11
NumberOfItems : 1
PartNumber : Diochez7i4oad9xf-11
ProductDescription : 1. The fiber optical power meter has 3 kinds of connector and can measuring 7 kinds of wavelength.
2. Resistant to shock and wear,very strong and reliable.
3. The measuring is of high accuracy and the response is quick.
4. Can working normally at temperature ‑10~+60℃.
5. Powered by 3 pcs AA battery,each to switch battery.

Specification:
Item Type:Fiber Optical Power Meter
Wavelength Range: 800-1700
Connection Port: SC/FC/ST
Probe Range: IngaAs
Measuring Range: -70~+6db
Uncertainty: ±5%
Linear Display: 0.1%
Working Temperature: -10~60℃
Storage Temperature: -25~70℃
Automatic Shutdown Time: 10min
Battery:3 x AA Battery(Not Included)

PackageList:
1 x Power Meter
1 x Connector

Note:
The LED display is weak and the boot cannot be displayed.
It may be because the battery is low, you can replace the battery in time.

LED display data is not normal?
It is possible that the connector is faulty, dirty or locked. Reconnect the connector and clean the sensor

How to restore the factory settings?
Press the in + zero button at the same time

The calibration steps are as follows:
1. Press the λ + LIGHT button at the same time, the nm at the end of the first line is not displayed.
2. Each time the LIGHT button is pressed, the power value is increased by 0.05dBm, and the power value is adjusted to the standard value by these two buttons.
3. Press the zero button to save
4. Restart the optical power meter or press the in + LIGHT
The nm at the end of the first line of the key is displayed and ready for use.
ProductSiteLaunchDate : 2024-07-26T19:32:04.726Z
Size : Optical power meter
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43222600