Cart 2 india

Specification
Brand : Othmro
BulletPoint : 【Note】-Needle roller bearings can bear bidirectional axial load; keep the working environment of the bearing clean and lubricate the bearing in time
ExternallyAssignedProductIdentifier1 : 889575479844
ExternallyAssignedProductIdentifier2 : 0889575479844
ItemName : Othmro 5Pcs HK0908 Needle Roller Bearings, Drawn Cup Open End 2/5-inch Bore 1/2-inch OD 3/10-inch Width 4.05 kN Static Load 3.65 kN Dynamic Load High Carbon Chromium Bearing Steel
ItemPackageDimensions_Height : 8.5 centimeters
ItemPackageDimensions_Length : 1.4 centimeters
ItemPackageDimensions_Width : 4.2 centimeters
ItemTypeKeyword : needle-roller-bearings
Manufacturer : Othmro
Material : Carbon Steel
ModelNumber : OTH190822Z-0100
PartNumber : OTH190822Z-0100
ProductDescription : Othmro Needle Roller Bearings

Description:
1.Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
2.These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
3.Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
4.For various applications such as agricultural and construction equipment, pumps and compressors, and two-cycle engines,among others.

Specification:
Size:9x13x8
Modle:HK0908
Dynamic load(kgf):3.65
Static load (kgf):4.05
Grease lubrication speed (r/min)：41667
Oil lubrication speed (r/min):25000
Cage:J steel plate stamping
Material：GCr34

Package Content
5pcs x Needle Roller Bearings

Note:
1.Keep the bearing working environment clean and bearing lubricated in time.
2.Install with press machine or special tools instead of hammers because beating may lead to local deformation.
3.Please refer to the picture and select right type before your order.

ProductSiteLaunchDate : 2019-10-18T05:48:37.110Z
Size : 9x13x8mm
Style : 5pcs
SupplierDeclaredDgHzRegulation : not_applicable