Cart 2 india

Specification
Brand : DINGGUANGHE-CUP
BulletPoint : Bearings
BulletPoint1 : Model: HK081410SS; Type: Drawn Cup Needle Roller Bearing
BulletPoint2 : Inner Diameter: 8 mm; Outer ring material：304
BulletPoint3 : Rolling pin material：440c; Outer Diameter: 24 mm
BulletPoint4 : Thickness: 10 mm; Weght (g): 5.35
BulletPoint5 : Quantity: 1 Lot = 2 Pcs
BulletPoint6 : Pillow block used for agricultural machinery transportation systems or construction machinery textile machinery ceramics machinery
Color : One Color
ExternallyAssignedProductIdentifier : 8306034585820
ItemName : Needle Roller Bearings HK081410SS 8x14x10mm Needle Bearings 2Pcs 440C Stainless Steel Drawn Cup Needle Roller Bearing HK081410 7941/8 HK081410 Bearings
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : DINGGUANGHE-US
Material : Stainless Steel
ModelNumber : NDIDINCH
NumberOfItems : 1
PartNumber : DINGGUANGHE-US
ProductDescription : High precision, fast speed, long life.
DRAWN CUP NEEDLE ROLLER BEARINGS

Structure & introduction

The outer ring of drawn cup needle roller bearing is punched with the high-quality steel sheet. The outer ring has thin wall.

The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture. It is suitable for small section height, or when the housing bore isn't used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location.

The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway. However, the proper LR type inner ring can be used in accordance with application condition.

The drawn cup needle roller bearing has two structures-with retainer and with full of needles. They are divided into opened type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity.

Characteristics & classification

The outer ring of drawn cup needle roller bearing is punched with the steel sheet. It has the small sectional height and the large load carrying capacity and is suitable for economic mass production. The interference fit between outer ring and bearing housing is applied to this kind of needle roller bearing without axial fixing device. Even for the condition of high load, it fully maintains bearing function either. In addition, with the large grease storage capacity, it is unnecessary to add grease for a long-term operation.

Since one end of the close-end bearing is sealed, it is suitable for the end of shaft with bearing the small axial sliding force.

Model HK, TA, TLA, open-end drawn cup needle roller bearings with retainer,

Model BK close-end drawn cup needl
ProductSiteLaunchDate : 2021-01-09T08:53:19.095Z
Size : One Size
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 31171500