Cart 2 india

Specification
Brand : KOVNOVI
BulletPoint : SPCC OUTER RING+GCR15 NEEDLE ROLLER
BulletPoint1 : Model: HK1010 Drawn Cup Needle Roller Bearing
BulletPoint2 : Inner Diameter: 10 mm
BulletPoint3 : Outer Diameter: 14 mm
BulletPoint4 : Thickness: 10 mm
BulletPoint5 : Weght (g): 3.58
Color : One Color
ExternallyAssignedProductIdentifier : 4670264590867
ExternallyAssignedProductIdentifier1 : 035373207039
ExternallyAssignedProductIdentifier2 : 4047643173186
ExternallyAssignedProductIdentifier3 : 0035373207039
ExternallyAssignedProductIdentifier4 : 04047643173186
IncludedComponents : AS PICTURE
ItemName : KOVNOVI 10Pcs HK1010 Needle Bearings 10x14x10mm Drawn Cup Needle Roller Bearing HK101410 TLA1010Z
ItemPackageDimensions_Height : 3.302 centimeters
ItemPackageDimensions_Length : 11.684 centimeters
ItemPackageDimensions_Width : 11.43 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : DINGGUANGHE-US
Material : Steel
ModelNumber : 09263-22039
NumberOfItems : 1
PartNumber : DHLUNCDUU
ProductDescription : DRAWN CUP NEEDLE ROLLER BEARINGS

Structure & introduction

The outer ring of drawn cup needle roller bearing is punched with the highquality steel sheet. The outer ring has thin wall.

The drawn cup needle roller bearing has the characteristics of small radial section area, large load carrying capacity, less inertia and economic manufacture. It is suitable for small section height, or when the housing bore isn't used for raceway, this type is recommended to use. The bearing is assembled into the housing bore under a certain pressure without further axial location.

The drawn cup needle roller bearing generally takes its shaft diameter as the internal raceway. However, the proper LR type inner ring can be used in accordance with application condition.

The drawn cup needle roller bearing has two structures-with retainer and with full of needles. They are divided into opened type and close-end type. The structure with retainer has the single seal ring and double seal ring. The structure with full of needles has a large load carrying capacity.

Characteristics & classification

The outer ring of drawn cup needle roller bearing is punched with the steel sheet It has the small sectional height and the large load carrying capacity and is suitable for economic mass production. The interference fit between outer ring and bearing housing is applied to this kind of needle roller bearing without axial fixing device. Even for the condition of high load, it fully maintains bearing function either. In addition, with the large grease storage capacity, it is unnecessary to add grease for a long-term operation.

Since one end of the close-end bearing is sealed, it is suitable for the end of shaft with bearing the small axial sliding force.

Model HK, TA, TLA, open-end drawn cup needle roller bearings with retainer,

Model BK close-end drawn cup needle roller bearing with retainer,

Model
ProductSiteLaunchDate : 2023-02-08T07:50:39.336Z
Size : Open
SpecificationMet : Iso
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 31171500