Cart 2 india

Specification
Brand : NTN
BulletPoint1 : [ This Drawn Cup Needle Roller Bearings 12x16x10mm have a deep thin-walled outer ring with open ends (HK series) ]
BulletPoint2 : [ They are designed for applications where the housing bore cannot be used as a raceway for a needle roller and cage assembly ]
BulletPoint3 : [ Dimensions: 12mmx16mmx10mmThis Drawn cup needle roller bearings runs directly on a shaft, if the shaft cannot be hardened and ground they can be combined with an inner ring ]
BulletPoint4 : [ The drawn cup of hardened steel and the needle roller and cage assembly of these bearings form a non-separable unit. It is widely apply on machinery, machine tool, pumps and compressors, gearing
BulletPoint5 : Operates continuously at temperatures up to 250 degrees F (120 degrees C)
ExternallyAssignedProductIdentifier : 3121204192098
ExternallyAssignedProductIdentifier1 : 7316577742704
ExternallyAssignedProductIdentifier2 : 07316577742704
ExternallyAssignedProductIdentifier3 : 00605790202025
IncludedComponents : No
ItemName : HK1210 NTN New Needle Bearing
ItemPackageDimensions_Height : 1.778 centimeters
ItemPackageDimensions_Length : 4.572 centimeters
ItemPackageDimensions_Width : 4.318 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : needle-roller-bearings
Manufacturer : NTN
Material : Alloy Steel
Material1 : Metal
Material2 : steel
ModelNumber : 305802 C-2Z
NumberOfItems : 1
PartNumber : HK1210
ProductDescription : Enjoy Smooth Machine Proformance and Less Breakdown. Needle Roller Bearings are a type of roller bearings and are classified as either radial or thrust depending on the direction of the load they support. This bearing type is composed of an outer ring drawn from a thin steel plate by precision drawing, needle rollers and a cage assembled in the outer ring. It is Design to use a shaft as the direct raceway surface without using inner ring. The outer ring of this bearing type is of such a construction that the needle rollers and the cage are not separated from one another, so that the bearing is only press-fitted in a rigid housing with proper fit torque. Thus, this bearing type needs no snap ring, etc. to fix itself in axial direction and, in addition, is easy to handle.
ProductSiteLaunchDate : 2022-01-28T17:54:40.732Z
SpecificationMet : ISO 9001
SpecificationMet1 : Abma 18.2
SpecificationMet2 : Astm F2162
StreetDate : 2017-11-25T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1