Cart 2 india

Specification
Brand : HIPICCO
BulletPoint1 : [Model] - HK0408 (Bore Dia. (Fw)= 4mm, Outer Dia. (D)a= 8mm, Width (C)= 8mm)
BulletPoint2 : [MATERIAL] - ST14 Steel Drawn Cup, ST13 Steel Cage, GCr15 Needle Roller, high load carrying capacity and stiffness, good heat tolerance.
BulletPoint3 : [FEATURES] - The size is standardized, easy to install and disassemble, and easy to maintain; Pre-Lubricated. Good running properties; Low cross section, enable downsizing and suit for use in restricted mounting spaces.
BulletPoint4 : [CAPABILITY] - Dynamic Load Rating (Cr): 1540N; Static Load Rating (Cor): 1070N; Limiting Speed (Oil): 40000rpm
BulletPoint5 : [APPLICATION] - Needle bearings are used in automobile components such as rocker arm pivots, pumps, compressors, and transmissions, also used for office equipment, paper-towel dispensers, exercise equipment, appliances and two-speed gearboxes.
Color : Silver
IncludedComponents : Drawn Cup Needle Roller Bearings
ItemName : HiPicco Drawn Cup Needle Roller Bearings, 10pcs HK0408 Open End Caged Bearing, 4mm Bore, 8mm OD, 8mm Width ST14 Steel Single Row Roller
ItemPackageDimensions_Height : 8 millimeters
ItemPackageDimensions_Length : 100 millimeters
ItemPackageDimensions_Width : 10 millimeters
ItemPackageQuantity : 10
ItemTypeKeyword : needle-roller-bearings
Manufacturer : HiPicco
Material : Alloy Steel
ModelNumber : HK0408
NumberOfItems : 10
PartNumber : H2023021938
ProductDescription :

Specification:

•     Model: HK0408
•     Drawn Cup Material: ST14 Steel
•     Cage Material: ST13 Steel
•     Needle Roller Material: Chromium Steel (GCr15)
•     Bore Diameter (Fw): 4mm
•     Outside Diameter (D): 8mm
•     Width: 8mm
•     Static Load Capacity (Cor): 1070N
•     Dynamic Load Capacity (Cr): 1540N
•     Maximum Rotational Speed (Oil): 40000rpm
•     Number of Packs: 10 Pcs

Description:

•     Drawn Cup Needle Roller Bearing features a deep drawn, thin-walled outer ring. They are compact bearings with high load carrying capacity and stiffness.
•     These bearings are especially suitable for high dynamic loads or radial-limited installation. They are mounted with a tight interference fit in the housing.
•     Shoulders or snap rings are not required to locate the bearing axially, thus enables a simple and economic design of the housing bore.
•     For various applications such as planetary gears in automobiles, constant mesh gearboxes, agricultural and construction equipment, pumps and compressors, and two-cycle engines, among others.

    NOTE: 

• Install with a press machine or special tools instead of hammers because beating may lead to local deformation or brittle fracture.

ProductSiteLaunchDate : 2023-03-18T14:01:19.103Z
Size : 4mm x 8mm x 8mm