Cart 2 india

Specification
Brand : LitOrange
BulletPoint1 : Needle Valves are designed to regulate flow to an instrument or other industrial application. They are rugged enough for the oil & gas market, and suitable for most industrial applications
BulletPoint2 : It can be used to open and close the propane. If you need a long time and stable control, it would be better to use with a regulator
BulletPoint3 : The flow works in either direction. If it leaks, you can replace the O ring inside with pliers, or a bit of Teflon tape is recommended for sealing on both end
BulletPoint4 : Working Pressure: Rated to 600 PSI. Temperatures range from -4 to 450 F
BulletPoint5 : Package include: 1 PCS 1/4" Female * 1/4" Male Needle Valve with 4 PCS Silicone O ring
BulletPoint6 : Coefficient of Volume: 46.2
ExteriorFinish : Brass
ItemName : Litorange 1 Pack Heavy Duty Brass Replacement Control Needle Valve 1/4" Male NPT X 1/4" Female NPT Connection（Pack of 1)
ItemPackageDimensions_Height : 13.8938 centimeters
ItemPackageDimensions_Length : 2.0066 centimeters
ItemPackageDimensions_Width : 10.3886 centimeters
ItemTypeKeyword : industrial-needle-valves
Manufacturer : Litorange
Material : Brass
MaximumOperatingPressure : 600 pounds_per_square_inch
NumberOfItems : 1
PartNumber : 121-FMx1
ProductDescription : Products Features:


Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.

Easy to install and easy to use for precise flow control. Needle valve for better control

If it leaks, you can replace the O ring inside with pliers, or a bit of Teflon tape is recommended for sealing on both end.

Designed for use in air, nature or propane and LPG Gas etc.

Needle value is great for use with standard propane and natural gas appliances.

Needle Valves are of the rising stem type and are designed to shut off the flow of the process media to the pressure instrument, thereby allowing the instrument to be isolated from the pressure media or removed from service.
Needle valves may also be used to throttle flow and aid in dampening pulsations.

It is recommended to place a needle valve, ball valve or gauge cock in line before every pressure gauge installation.

Temperatures range from -4 to 450 F. Max. Pressure: 600 PSI WOG


Tips: If you have an issue with the valve turning and turning (the threads on the stem are no longer engaged),
then loosen the nut under the stem, push down on the stem and turn the stem clockwise to re-engage the threads on the stem.
Then tighten the nut on the stem back up. If you over tighten the nut, the stem will not want to turn in either direction.


Package Include:

1 PCS 1/4" x 1/4" Needle Valve with 4 PCS silicone O ring

ProductSiteLaunchDate : 2024-03-08T03:20:09.467Z
Size : 1PCS 1/4 Female x Male
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141600
ValveType : Needle Valve