Cart 2 india

Specification
Brand : YIYIBYUS
BulletPoint1 : ✧【Strong Pressure Resistance】The S-type bearing shaft has a strong radial force and high-pressure resistance, which can effectively extend the service life of the product.
BulletPoint2 : ✧【Application】This product is generally applied to harvesting machines, augers, horizontal directional drilling rigs, coal mine type drilling rigs, trenching machines, lawn mower, food machinery, snow plow, concrete mixer, pump truck, machine tool, injection molding machinery, small crane, etc.
BulletPoint3 : ✧【High Precision】The precision processed stator and rotor whose flatness error does not exceed 0.08 inches have high precision.
BulletPoint4 : ✧【One-piece Construction】The one-piece construction allows you to start using the product directly without an additional installation.
BulletPoint5 : ✧【Powerful Power】High speed (continuous: 879rpm; intermittent: 975rpm) and high torque (continuous: 81N*M; intermittent: 108N*M) bring you greater power.
ExternallyAssignedProductIdentifier1 : 0722487938682
ExternallyAssignedProductIdentifier2 : 722487938682
IncludedComponents : 1 * Hydraulic Motor
ItemName : Hydraulic Motor for Char-Lynn 101-1001-009 and Eaton 101-1001 Motor H Series S-Bearing
ItemTypeKeyword : hydraulic-motors
Manufacturer : YIYIBYUS
Material : Steel
ModelName : eaton
NumberOfItems : 1
PartNumber : YIYIBYUS
ProductDescription :

Specification

Material: Cast Iron, Low Carbon Alloy Steel

Color: Black

Process:Metallurgy

Assembly Required: No

Compatible: For Char-Lynn 101-1001-009 and Eaton 101-1001

Shaft: 2.54cm/1 Inch Straight w/Woodruff Key O-Ring

Mount:  4 Bolt Flange

Port Size:  ½ NPTF   

Displacement: 50ML/R 1.69Oz/R

Flow Rate: Continuous: 45LPM; Intermittent: 50LPM

Speed: Continuous: 879rpm; Intermittent: 975rpm

Pressure: Continuous: 12.5MPA; Intermittent: 16.5MPA

Torque: Continuous: 81N*M; Intermittent: 108N*M

Gross Weight: 5.5kg/ 12.13 lbs 

Product Size:  10*10*19.3cm/ 3.94*3.94*7.6 in

Package Size:  26*13*13cm/ 10.24*5.12*5.12in

Package Included

1 * Hydraulic Motor

Notes

1.The normal operating oil temperature of this product is 68-140 ℉, and the maximum system operating temperature is 194 ℉ (not more than 1 hour).

2.Filter filtration accuracy is 10-30 microns, and it is better to add a magnetic block at the bottom of the oil tank to stop metal chips from entering the system. The solid level of working oil should not be higher than 19/16.

3.Please select the appropriate hydraulic oil according to the actual operation and ambient temperature. The oil viscosity at 104 ° F is 42-74MM2/S.

4.When used in series or parallel, the external drain must be used for pressure relief if the back pressure exceeds 10MPA (the rotating speed is lower than 200RPM). It is better to connect the external drain directly with the oil tank.

5.The best working condition of the motor should be selected at the rated working condition of 1/3-2/3.

6.In order to make the motor have a long service life, when adding load to the motor, it should first operate at 30% of the rated pressure for about 1 hour. In any case, please ensure that the motor is full of oil before adding load to the motor.

ProductSiteLaunchDate : 2023-03-28T08:54:59.014Z
SkipOffer : 1
Speed : 200 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26101300