Cart 2 india

Specification
Brand : Generic
BulletPoint : Motor Speed Controllers
BulletPoint1 : It can control high-power equipment, such as motors, bulbs, LED lights with, DC motors, micro-pumps, solenoid valves and so on. If you enter the PWM signal, you can control the motor speed, lamp brightness and so on.
BulletPoint2 : Note:
BulletPoint3 : At the same time, there is only one signal to control the module, can not use two or more signals to control the module.
BulletPoint4 : High level trigger voltage range: DC3.0V ~ 24V, the trigger signal in the 3.0V ~ 24V, MOS tube conduction. less than 0.6V, that is 0V ~ 0.6V, MOS tube is closed. signal voltage must not 0.6V ~ 3.0V, because the MOS tube is not fully open, high-power output will burn MOS.
BulletPoint5 : Low-level trigger voltage range: DC 0V ~ 0.6V, that trigger signal in the 0V ~ 0.6V, MOS tube conduction. higher than 3.0V, MOS tube is closed. signal voltage must not be 0.6V ~ 3.0V , Because the MOS tube is not fully open, high-power output will burn MOS.
BulletPoint6 : The maximum current up to 20A radiator or heat required to increase the fan
BulletPoint7 : 4. Power consumption: 7W.
BulletPoint8 : 5. 5 position adjustable.
Color : 4-PCS
ExternallyAssignedProductIdentifier : 7375606517027
FitType : Universal
IncludedComponents : No
IsValueStoresItem : 1
ItemName : Wiring Connecting Terminals - Dc 4V -60V High-Power Mos FET Trigger Drive Switch Module Board Pwm Adjustable Controller Dual-Mos Module
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : CHIKIMIKI
ModelName : DMBGRXJF
ModelNumber : DMBGRXJF
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CNCKE3B8ABF6A2225C6BEB8EC6FB78A5B154
ProductDescription : Highlight:The module supports high-level trigger, low-level trigger, switch control, PWM control
The use of imported dual-MOS parallel active output, lower internal resistance, current, power strong, continuous current at room temperature is 10A, 600W, to meet most of the equipment used
Wide voltage input: DC 4V ~ 60V
Easy to control high-power equipment
Applications: It can control high-power equipment, such as motors, bulbs, LED lights with, DC motors, micro-pumps, solenoid valves and so on. If you enter the PWM signal, you can control the motor speed, lamp brightness and so on.
Note:
At the same time, there is only one signal to control the module, can not use two or more signals to control the module.
High level trigger voltage range: DC3.0V ~ 24V, the trigger signal in the 3.0V ~ 24V, MOS tube conduction. less than 0.6V, that is 0V ~ 0.6V, MOS tube is closed. signal voltage must not 0.6V ~ 3.0V, because the MOS tube is not fully open, high-power output will burn MOS.
Low-level trigger voltage range: DC 0V ~ 0.6V, that trigger signal in the 0V ~ 0.6V, MOS tube conduction. higher than 3.0V, MOS tube is closed. signal voltage must not be 0.6V ~ 3.0V , Because the MOS tube is not fully open, high-power output will burn MOS.
Parameter:
Operating voltage: DC 4V - 60V
Trigger source: high level trigger (DC3.0V - 24V), low level trigger (DC 0.0V ~ 0.6V), switch control, can connect MCU IO port, PLC interface, DC power supply, etc. PWM signal, support signal frequency range of 0 - 2.5KHZ
Output capacity: DC 4V - 60V, continuous current 10A at room temperature, power 600W
Auxiliary cooling conditions, the current up to 15A
4.Life: unlimited switch
Condition: New
Type: Voltage Regulator
Dissipation Power: 600W
Applications: Computer
Operating Temperature: -40 -85 Celsius
colour:Blue
Material:abs
size:46.5 x 29.2mm
Package includes:ProductSiteLaunchDate : 2024-11-10T09:59:04.826Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39121400