Cart 2 india

Specification
Brand : Hvxrjkn
BulletPoint : BLODGETT
BulletPoint1 : [Various Specifications] Input voltage range 110-120V, maximum current capacity 15A, rated current 9A. It supports a maximum resistive load of 4000W and an inductive load of 1500W
BulletPoint2 : [Overload Protection Switch] When the current exceeds 15A, the switch automatically cuts off the power supply to ensure the safety of the equipment and users. Flame-retardant casing provides an extra layer of protection
BulletPoint3 : [LED Voltage Display] It features back clip, allowing you to easily attach it to your belt while working. The knob provides precise voltage control, while the LED voltage display ensures easy monitoring
BulletPoint4 : [Standard Outlet] The product has a standard outlet on the bottom that is compatible for Type A and Type B plugs commonly used in the United States
BulletPoint5 : [Scope of Application] This variable fan speed controller is suitable for powering fans, small motors, soldering irons, and other inductive load equipment. It can also be used with resistive loads such as kettles and electric heaters
ExternallyAssignedProductIdentifier : 5479228773105
ExternallyAssignedProductIdentifier1 : 0218710845914
ExternallyAssignedProductIdentifier2 : 0218710844917
ExternallyAssignedProductIdentifier3 : 218710844917
ExternallyAssignedProductIdentifier4 : 218710845914
ItemName : Variable Speed Controller, Fan Speed Controller, 110-120V 15A Max AC Motor Speed Controller, Electronic Voltage Regulator for Electric Motors with Overload Protection, LED Display
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : YUECHENE_US
Material : Copper
ModelNumber : 187-1084
NumberOfItems : 1
PartNumber : 1000210
ProductDescription :

Parts List:

1×Switch 1×Hook 1×Instruction Manual

Highlight description:

Product Name: Variable Fan Speed Controller

Product Material: ABS

Input Voltage Range: 110-120V

Maximum Current Capacity: 15A

Rated Current: 9A

Wire Length: 1m

Size: 12×6.5×5.5cm

Plug Standard: US

Instructions:

Before use, adjust the knob to the "0" position, connect the product power cord to the AC 110V socket, and the output voltmeter displays the voltage (the voltage displayed when no load is a virtual voltage, and a load must be connected to measure the correct voltage). Connect the device to the output socket and slowly adjust the knob clockwise to increase the voltage and counterclockwise to decrease the voltage.

Precautions:

The peak power of the module of this product is 4000W. The maximum power of the resistive load connected to the power connector shall not exceed 2000W, the maximum power of the inductive load shall not exceed 500W, and the maximum power of the capacitive load shall not exceed 300W, otherwise the product may be damaged. For fans with power above 550W, the speed should be adjusted at least half the speed. For electrical appliances with power above 1000W, turn the knob to 0 when not in use to avoid excessive instantaneous starting current and damaging the regulator the next time you start it.

Notes:

1.There may be slight differences between the picture and the actual color of the commodity. We will try our best to show you the exact color.

2.Please allow slight dimension difference due to manual measurement.

ProductSiteLaunchDate : 2024-06-03T08:55:43.325Z
UnitCount : 30.6883
UnspscCode : 26111700