Cart 2 india

Specification
Brand : Reland Sun
BulletPoint1 : Standby control to save power
BulletPoint2 : CW/CCW/short brake/stop motor control modes
BulletPoint3 : Built-in thermal shutdown circuit and low voltage detecting circuit
BulletPoint4 : All pins of the TB6612FNG broken out to 0.1" spaced pins
BulletPoint5 : Filtering capacitors on both supply lines,Dimensions: 0.8x0.8
CircuitType : 1-way
Color : Black
ControlMethod : touch
ExternallyAssignedProductIdentifier : 8849478004002
ExternallyAssignedProductIdentifier1 : 0739227846008
ExternallyAssignedProductIdentifier2 : 739227846008
IncludedComponents : inc
InternationalProtectionRating : IP66
ItemName : TB6612FNG Dual DC Stepper Motor Driver Module 1.2A Peak 3.2A Better Than L298N
ItemPackageDimensions_Height : 8 inches
ItemPackageDimensions_Length : 10 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Reland Sun
Material : Copper
ModelName : gear
ModelNumber : 194R-HM4E A
MountingType : Panel Mount
NumberOfItems : 1
OperationMode : manual
PartNumber : 739227846008
ProductDescription : Description: The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes - CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode. Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse). Board comes with all components installed as shown. Decoupling capacitors are included on both supply lines. All pins of the TB6612FNG are broken out to two 0.1" pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other. Features: Power supply voltage: VM=15V max, VCC=2.7-5.5V Output current: Iout=1.2A(average) / 3.2A (peak)
ProductSiteLaunchDate : 2021-11-20T06:24:36.890Z
SpecificationMet : Etl, Iec 60669-2-1:2002, Ip66
Speed : 10 rpm
Style : REMAN
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SwitchType : Push Button
TerminalType : Screw
UnitCount : 1
UnspscCode : 26111500
Voltage : 24 volts