Cart 2 india

Specification
Brand : Akozon
BulletPoint1 : Application :The speed of the motor can be controlled by adjusting the frequency of the potentiometer.This module is supplied as a stepper drive signal. To control the stepper motor, but also must have the drive to use.
BulletPoint2 : Quality Assurance: Welcome to purchase our products. Our products have undergone strict quality control to ensure that each customer can purchase their favorite products. If you encounter any problems, please feel free to contact our customer service, thank you!
BulletPoint3 : Six Ports :PUL + and PUL- pulsed positive and negative; EN + and EN- is to enable the positive and negative terminals; DIR + and DIR- are the positive and negative directions. These six lines are connected to drive the corresponding pulse, direction, so six ports possible.
BulletPoint4 : Power Supply: 15-160VDC or 5-12VDC. If you are using 5-12VDC power, positive end connect DC 5-12V Input, negative end connect Common Cathode End.The forward and reverse of the motor can be controlled by pressing the key.
BulletPoint5 : 3 Frequency Signals:The controller has high, medium and low total of three types of frequency signals can be used to select jumper.Frequency of measurement can amount PUL and common cathode terminal (GND) two ports.
Color : Defult
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0749436976120
ExternallyAssignedProductIdentifier2 : 749436976120
HandlebarType : T-bar
ItemDisplayDimensions_Depth : 11.5 centimeters
ItemDisplayDimensions_Diameter : 5 centimeters
ItemDisplayDimensions_Height : 5 centimeters
ItemDisplayDimensions_Length : 11.5 centimeters
ItemDisplayDimensions_Width : 7 centimeters
ItemDisplayWeight : 64 grams
ItemName : Pulser Signal for Stepper Motor-Stepper Motor Controller PWM Pulse Signal Generator Regulator Board
ItemPackageDimensions_Height : 13 centimeters
ItemPackageDimensions_Length : 1.78 centimeters
ItemPackageDimensions_Width : 6.35 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Akozon
Material : copper
ModelNumber : Nikousk32dbigua
NumberOfWheels : 2
PartNumber : Akozon4iayzughrn
ProductDescription : Specification:
Power supply voltage: 15-160V / 5-12V
Frequency: High: 5.8KHZ-127KHZ, Mid: 590HZ-15.8KHZ, Low: 82HZ-2.3KHZ
Size: Approx. 73 x 51 x 37mm / 2.87 x 2 x 1.45inch
Weight: 50g
Quantity: 1pc

Package List:
1 x PWM Generator

Note:
If you use to start or stop the function, ENA controller enable terminal must be connected to common cathode or common anode drive.


ProductSiteLaunchDate : 2019-09-10T01:44:20.458Z
RecommendedUsesForProduct : electric vehicles
Size : default
Style : Knobs
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111500