MSP6719 Magnetic Pickup MPU Generator Speed Sensor RPM Sensor For Diesel Generator Set

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 15600/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : PXRZXBICQ
Color : One Color
ExternallyAssignedProductIdentifier : 7320488776659
ItemName : MSP6719 Magnetic Pickup MPU Generator Speed Sensor RPM Sensor For Diesel Generator Set
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : PXRZXBICQ
ModelName : PXRZXBICQ
ModelNumber : PXRZXBICQ
NumberOfItems : 1
PartNumber : PXRZXBICQ
ProductDescription : MSP6719 Magnetic Pickup MPU Generator Speed Sensor RPM Sensor For Diesel Generator Set
Description
*The magnetic speed sensor indicates when ring geat teeth, or other ferrous projections, pass the tip of the sensor.
*Electrical impulses are induced within the coil and sent to the speed control unit.
*The signal from the magnetic speed sensor, teeth per second(HZ), is directly proportional to engine speed.The magnetic speed sensor is mounted in the ring gear case or fly wheel bell housing of the engine.
*The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft andcentered over the ring gear teeth.
*A spot face should be present to provide a flast surface on which to anchor the locknut.
*With the engine stopped, screw the speed sensor in until it touches a gear tooth, then back it out 0.75 of aturn and secure it with the locknut.
*Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet thespeed control unit specifications.
*The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit.
*The leads may need shielding if they are longer than 10 ft(3 metres), or if external interferenceis present.
Do not connect either of the speed sensor leads to anything but the speed control unit used.The shield should not be connected at the speed sensor end.

Thread Size : 5/8-18UNF
Off-tooth distance : 028 in min.-.042 in max
MAX output : 30V AC
Length : 60mm
Range : 50-5000Hz
Idle output : 1.5 volts AC Min
ProductSiteLaunchDate : 2024-10-15T03:06:55.852Z
Size : One Size
UnitCount : 1

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.