Cart 2 india

Specification
Brand : HALLOMOTOR
BulletPoint1 : The universal DC motor speed controller is suitable for DC 10-60V 20A pulse width modulation. It can easily provide a continuous current of 20A to your DC motor or other DC load. Effective to use for speed adjustment.
BulletPoint2 : Overall Dimensions: 77x48x28mm/3.03x1.89x1.1 inch(L*W*H); Voltage: DC 10-60V; Maximum current: 20A; Potentiometer resistance: B100K; In the package of: 1 x DC motor speed controller.
BulletPoint3 : The governor extremely high efficiency, torque, small heating. Equipped with power reverse connection protection, control voltage over voltage protection, 20A rapid ceramic fuse.
BulletPoint4 : Steps of installation: 1. Connect the voltage of 10-60v DC to the circuit. 2. Then speed of the motor can then be controlled through the potentiometer.
BulletPoint5 : Note that this is not a power module, it must be connected to the motor to speed, without the motor multimeter output does not change.
Color : Black
ExternallyAssignedProductIdentifier : 8371863625412
ExternallyAssignedProductIdentifier1 : 0710594526243
ExternallyAssignedProductIdentifier2 : 710594526243
ItemName : HALLOMOTOR eBike Electric Bike Universal 36V 48V 52V 35A Intelligent Sine Wave 3-Mode Controller for 750W 1000W 1500W Motor with UKC1 Colorful LCD Display (35A Controller and UKC1 Color Display)
ItemPackageDimensions_Height : 12 centimeters
ItemPackageDimensions_Length : 3.5 centimeters
ItemPackageDimensions_Width : 8.1 centimeters
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Hallomotor
Material : Copper
ModelName : zip
ModelNumber : mea220301ee0667
NumberOfItems : 1
PartNumber : mea220301ee0667
ProductDescription : No need to be headache on Hall sensor failure or wrong combination on 3-phase! 3-mode controller is coming! Very important Notice: This controller can only work without display or with our display, please never use it with your own display (because program is different) Why 3-mode Controller? Support Hall Sensor Mode (Sine Wave Mode) Support Non-Hall Mode (If your motor hall sensor burned or not match, controller will still work in square wave mode) Self-learning Function: Even wrong 3-phase combination between motor and controller, doesn’t matter, above self-learning process can correct it! Parts Including: 1. 18 MOSFET 35A 36V 48V, 52V Universal Voltage 750W-1500W Intelligent 3-mode Sine Wave Controller 2. 36V, 48V, 52V UKC1 Colorful Display (Optional) Advantage: 1. Sine Wave Controller which support 3-mode (hall sensor mode, non-hall mode, self-learning) and smart match with each motor through self-learning, works with high efficiency, less noise, and lower energy consumption, which makes your electric vehicles or electric motorcycles more comfortable and easier to control, give you best pedal experience 2. Universal Input Voltage Range: 36V/48V/52V 3. Work with or without display 4. Parameter setting via display 5. All protection make it long life and safe: over/under voltage, over current, over load, over heating, anti-runaway, locked-motor protection 6. Multi functions: Work with hall sensor mode or non-hall mode, smart match with different motor, 5-speed level for throttle and PAS, Speed limit, Reverse, Cruise, Push Assistant, Anti-thief, Regenerative Braking, Electric Braking and etc. 7. Best heat sinking with Aluminium Case 8. Black anodized Aluminium Controller Case against scratch
ProductSiteLaunchDate : 2022-06-02T07:13:28.664Z
Size : 35A Controller and UKC1 Color Display
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26000000
Voltage : 36 volts