Cart 2 india

Specification
Brand : PXRZXBICQ
BulletPoint1 : Elevates your projects with our high precisions Steppers Motor Pwms Pulses Generator, designs for simple integration with various Steppers motors.
BulletPoint2 : Excellent for use in robotics, machines, and automates home projects, this Pwms generator ensures your Steppers motor operates smoothly and efficiently.
BulletPoint3 : Our Small and lightweight designs, comes with easy to follow package Listing, making setups quick for immediate project integration.
BulletPoint4 : Suitable for hobbyists, engineers, and make who require precise control over their Steppers motor's speed and position in their creative and technical endeavors.
BulletPoint5 : This Multifunction Controllers boasts a wide power supply Voltages ranges from 15-160VDC or 5 12VDC and three adjustable frequency bands to suit different operational needs.
Color : One Color
ExternallyAssignedProductIdentifier : 7320488776703
IncludedComponents : No
ItemName : Generator Speed Sensor MSP676 Magnetic Pickup MPU676 Speed Sensor
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : PXRZXBICQ
ModelName : PXRZXBICQ
ModelNumber : PXRZXBICQ
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : PXRZXBICQ
ProductDescription : Generator Speed Sensor MSP676 Magnetic Pickup MPU676 Speed Sensor
Description
The magnetic speed sensor is mounted in the ring gear case or flywheel bell housing of the engine. The threaded hole for the speed sensor should be perpendicular to the centerline of the crankshaft and centered over the ring gear teeth. A spot face should be present to provide a flat surface on which to anchor the locknut. With the engine stopped, screw the speed senor in until it touches a gear tooth, then back it out 3/4 of a turn and secure it with the locknut. Any ferrous gear may be used as long as the frequency and amplitude of the resulting signal meet the speed control unit specifications The wire leads should be twisted for their entire length from the magnetic speed sensor to the control unit. The leads may needshielding if they are longer than 10 ft. (3 metres), or if external interference is present.
Do not connect either of the speed sensor leads to anything but the speed control unit used.
Thread : 5/8-24UNF-2A
Off-tooth distance : 0.64-0.89mm
Inductance value : 142MH+25%
Resistance value : 300 MAX
Idle output : 1.5 volts AC Min
ProductSiteLaunchDate : 2024-10-15T03:06:54.805Z
Size : One Size
UnitCount : 1
WarrantyDescription : No warranty.