Cart 2 india

Specification
Brand : Tyenaza
BulletPoint1 : CURRENT REGULATION INTEGRATED CIRCUIT: This adjustable LED driver is a current regulation integrated circuit operating from an input voltage of 2.8V to 6V, the constant output current can be set up to 1.5A with an external resistor
BulletPoint2 : IDEAL FOR LED DRIVER: It consists of high precision reference voltage, amplifier, current mirror, etc. The on-chip power transistor and current sense block greatly reduce the external component count, which makes this product ideal for LED driver
BulletPoint3 : E CHIP: Adjustable Converter with e chip enable function, which can shutdown the whole chip to limit the current consumption within 1uA. When LED current approaches 1.9A(Typical), the over current block begins to function to prevent the LED current from increasing further
BulletPoint4 : TEMPERATURE REGULATION: Adopts the temperature regulation instead of temperature protection function, the temperature regulation can make the LED being turned on continuously in case of high ambient temperature or high voltage drop
BulletPoint5 : ABOUT INPUT VOLTAGE: When the CE pin is high, the input voltage is greater than 2.8V, and is larger than the LED forward voltage plus the required voltage drop, it functions normally to deliver constant current from the LED pin
ExternallyAssignedProductIdentifier : 6941835804910
IncludedComponents : No
ItemName : Constant Current LED Driver, DC 2.8-6V LED Driver Board 30-1500mA Adjustable Module LED PWM Controller for LED 18650 Li ion
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 2 centimeters
ItemPackageDimensions_Width : 1.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Tyenaza
Material : Copper
ModelName : Acoutoz869vhbuim
ModelNumber : Tyenazargu6an5zx4
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : Tyenazargu6an5zx4
ProductDescription :

Specification: 

Working voltage : DC 2.8-6V(Perfect for 3V 3.3V 3.7V 4.5V 5V 6V LED Driver)

Output current: 30-1500mA

Maximum output power: 9W

Can drive 1-16pcs 2.8-6V LEDs (maximum current does not exceed 1.5A)

Current regulation: 1 through adjustable resistance; 2 through PWM signal control

Weight: 0.56g

 

Package list:

1 * Adjustable Current LED Driver 

ProductSiteLaunchDate : 2021-07-05T01:50:35.213Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 39120000