Be In Your Mind PWM Motor Speed Controller ZK-PP2K PWM Pulse Frequency Generator DC 3.3~30V 12V 24V LCD Pulse Frequency Cycle Module for Signal Generator

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 3500/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Brand : Be In Your Mind
BulletPoint1 : DUAL MODE: PWM mode: Adjust the frequency and duty cycle. PULSE pulse mode: Set the positive and negative pulse time, the number of pulses and the delay time.
BulletPoint2 : Product Specifications: 1.Working voltage:3.3~30V (note that the positive and negative poles should not be reversed, otherwise it may burn) 2.Frequency range:1Hz~150KHz, the accuracy is about 2%. Motor speed regulation generally chooses 20KHZ 3.Duty cycle range:0-100%,1% step 4.Number of pulses:1-9999, or infinite (display '---' means infinite) 5.Delay output time:0.000s-9999s, the minimum can be set to 1ms 6.Positive and negative pulse width length:0.000s-9999s, the minimum can be set to 1ms
BulletPoint3 : Key operation instructions: 1. MOS switch type output, pay attention to no waveform, can directly drive the motor solenoid valve, etc. 2. When the number of switches reaches the set value, the output will be automatically stopped, and 'OUT' will disappear. 3. Press the ON key to control the presence or absence of the switch, and the disappearance of OUT means the output is turned off. 4. Power on and restart or ON key to turn on the output, and recalculate the switching times.
BulletPoint4 : Application scenarios: 1. PWM signal generator, square wave rectangular wave signal generator. 2. Used to generate square wave and rectangular wave signal to control DC motor or stepper motor driver; used for servo motor, stepper motor, substitute PLC pulse, etc. 3. ZK-PP2K can be matched with the driver to realize dimming, speed regulation, control solenoid valve, etc. ZK-PP2K can directly drive loads such as electric light motor solenoid valve.
BulletPoint5 : The power uses the overall two half-bridge driving force chip low n-channel mosfet components. completer two 1/2-bridge motive force chip dependable drive mode, the mosfet switching losses to a minimum. improve power utilization.
ExternallyAssignedProductIdentifier : 6941835804910
IncludedComponents : No
ItemName : Be In Your Mind PWM Motor Speed Controller ZK-PP2K PWM Pulse Frequency Generator DC 3.3~30V 12V 24V LCD Pulse Frequency Cycle Module for Signal Generator
ItemPackageDimensions_Height : 3 centimeters
ItemPackageDimensions_Length : 9 centimeters
ItemPackageDimensions_Width : 6 centimeters
ItemTypeKeyword : motor-speed-controllers
Manufacturer : Be In Your Mind
Material : Copper
ModelName : Acoutoz869vhbuim
ModelNumber : Acoutoz869vhbuim
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : 606-BI
ProductDescription :

Item Descriptions:
-DUAL MODE: PWM mode: Adjust the frequency and duty cycle. PULSE pulse mode: Set the positive and negative pulse time, the number of pulses and the delay time.
-Product Specifications: 1.Working voltage:3.3~30V (note that the positive and negative poles should not be reversed, otherwise it may burn) 2.Frequency range:1Hz~150KHz, the accuracy is about 2%. Motor speed regulation generally chooses 20KHZ 3.Duty cycle range:0-100%,1% step 4.Number of pulses:1-9999, or infinite (display '---' means infinite) 5.Delay output time:0.000s-9999s, the minimum can be set to 1ms 6.Positive and negative pulse width length:0.000s-9999s, the minimum can be set to 1ms
-Key operation instructions: 1. MOS switch type output, pay attention to no waveform, can directly drive the motor solenoid valve, etc. 2. When the number of switches reaches the set value, the output will be automatically stopped, and 'OUT' will disappear. 3. Press the ON key to control the presence or absence of the switch, and the disappearance of OUT means the output is turned off. 4. Power on and restart or ON key to turn on the output, and recalculate the switching times.
-Application scenarios: 1. PWM signal generator, square wave rectangular wave signal generator. 2. Used to generate square wave and rectangular wave signal to control DC motor or stepper motor driver; used for servo motor, stepper motor, substitute PLC pulse, etc. 3. ZK-PP2K can be matched with the driver to realize dimming, speed regulation, control solenoid valve, etc. ZK-PP2K can directly drive loads such as electric light motor solenoid valve.

Package:
1pc ZK-PP2K PWM DC Motor Speed Controller

Item Specifications:
Voltage:24 Volts
Horsepower:150 Watts


ProductSiteLaunchDate : 2024-03-19T05:31:21.235Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 26111500

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.