Cart 2 india

Specification
Brand : iProtool
BulletPoint : 80W 10A 12V Reversible Adjustable DC Motor Speed Controller High Torque PWM Speed Regulator Control Switch 6-30V Potentiometer
BulletPoint1 : ★The resistance of the ohmic load should be less than 4000 W, and the power should be reduced by half or more for inductive or capacitive loads
BulletPoint2 : ★【USEFUL】: Simply connect the input terminals with a live cable or a neutral conductor (110 V to 220 V) and the output for charging. Then turn the knob to control the tension
BulletPoint3 : ★【CONTROLLED RECTIFIER】: This item has high power two-way silicone rectifier, and the current can be up to 20A. This is a good solution to the electric furnace overcurrent caused by low resistance during cooling
BulletPoint4 : ★【ADJUSTABLE】: With a wide voltage regulation range, the output voltage can be easily adjusted from 0V to the input voltage
BulletPoint5 : ★【MULTIPLE USES】: Can be widely used as a heat controller for electric ovens, water heaters, light dimmers for lamps, speed
Color : 1 Ratio 10---1500RPM
ExternallyAssignedProductIdentifier : 4852343736490
Horsepower : 1500 watts
IncludedComponents : inc
ItemName : 80W 10A 12V Reversible Adjustable DC Motor Speed Controller High Torque PWM Speed Regulator Control Switch 6-30V Potentiometer
ItemPackageDimensions_Height : 3.14 inches
ItemPackageDimensions_Length : 5.11 inches
ItemPackageDimensions_Width : 3.54 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motor-speed-controllers
Manufacturer : iProtool
Material : Metal
NumberOfItems : 1
PartNumber : ZQ_mixmoic10205
ProductDescription :
Descriptions:





Material: Plastic, metal


High efficiency, high torque, low heat generating


Control the speed of a DC motor with this controller


With reverse polarity protection, high current protection


Input: DC 6~30V


Output: Max 80W


PWM range: 10% ~ 95%


Current: Max 10A(Recommend you to use in 6A)


With potentiometer


With reversible switch


All tested before shipment





Operating Instruction:





1. Connect it to the power, ensure the positive inversion switch located in the middle of the zero, and connected with a DC power supply(the DC supply voltage range is more than 6V and less than 30V).Warning: do not reverse the positive and negative terminals of DC power source, otherwise regulator may be damaged.


2. Connect it to the motor, the motor line can be positive or negative, when the running direction is not consistent with the expectative one, you can adjust the sequence of lines or switch position to change the direction.


3. Adjust the switch. Positive inversion switch is used to control the motor speed direction. When the switch is located on the zero position, the motor stops rotating.


4.Adjust the potentiometer knob. Adjusting potentiometer knob can change output duty ratio of the regulator, then motor speed change.






Package Included:





1 x DC Motor Speed Controller


ProductSiteLaunchDate : 2021-04-13T01:30:59.188Z
Size : 7-13V DC Rated 12V
Speed : 1500 rpm
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnspscCode : 26111500
Voltage : 1 volts