Specification Brand : GOTOTOP BulletPoint1 : [Ultra-high Current Binding Posts] 75A full copper posts for superior conductivity and power control. BulletPoint2 : [Rc Absorption Protection] Thyristor includes rc circuit for added safety and protection. BulletPoint3 : [Upgraded Fan Control] Intelligent fan with switch for effective heat dissipation and extended lifespan. BulletPoint4 : [High-grade Aluminum Shell] Ensures safety and durability in a design. BulletPoint5 : [Unique Trigger Circuit] Controls voltage without hysteresis for precise regulation. adjusts from 0 after turning off resistive load to 10v upon restart, reaching maximum power voltage. ExternallyAssignedProductIdentifier : 7677850327781 IncludedComponents : No ItemName : 10000W Super High Power, Electronic Voltage Regulator Motor Speed Control Thermostat Dimmer with Upgraded Fan Control for Lighting and Heating Control ItemPackageDimensions_Height : 6 centimeters ItemPackageDimensions_Length : 20 centimeters ItemPackageDimensions_Width : 15 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : motor-speed-controllers Manufacturer : GOTOTOP ModelName : GOTOTOPc82xubk7p1 ModelNumber : GOTOTOPc82xubk7p1 NumberOfItems : 1 PartNumber : GOTOTOPc82xubk7p1 ProductDescription : Spec:
Item Type: AC Voltage Regulator Use Voltage: AC 110V-230V Maximum Power: 10000W (resistive load) Voltage Regulation: Ac 0V- adjustable between proximity input voltages Instructions: Connect the thyristor voltage regulator in front of the electrical circuit of the consumer, and connect the input and output wires respectively (without the zero-fire wire). Rotate the potentiometer knob to play light and dark dimming, speed, voltage, and temperature Role; very easy to use. Application: Using new bidirectional ultra-high power thyristor, thyristor standard 100A, resistive load can be adjusted arbitrarily between 0-input voltage for electrical appliances. Such as: electric furnaces, water heaters, lamps and lanterns, large motors and motors. So as to achieve the effects of dimming, temperature and pressure. It can be used for large appliances with an electric power of less than 10,000 W (pure resistive load). Because of the large power, ordinary household appliances or small factories are sufficient. (The inductive or capacitive load has a large starting current, which is 2-4 times the usual work. The power should be reduced during use, and it is best to leave less than half of the margin.)
Package List: 1 X SCR Voltage Regulator
Note: Pay attention that the load cannot exceed the specified maximum power. Pay attention to the temperature rise for the first use. If the temperature is very high (more than 80 degrees), the heat dissipation must be strengthened, otherwise the module and the electrical appliances will be burned out. For a large reduction, at least half of the margin should be left.