Cart 2 india

Specification
Brand : Walfront
BulletPoint1 : The interface output 0-10V analog , also can be configured as 0-5V output, convenient for you to choose the type you need
BulletPoint2 : Strong anti-interference ability, the frequency converter interface (AVI+, AVI-) isolated from the computer and the main control circuit, won’t be introduced by external strong current equipment
BulletPoint3 : Super USB interface motion control card, drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC
BulletPoint4 : 4 General-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other operations
BulletPoint5 : Maximum step-pulse frequency 100KHz, which suitable for the servo or stepping motor
CircuitBreakerType : Standard
Color : L293D Stepper Motor Drivers Controller
Color1 : Blue
Color2 : Silver
CurrentRating : 1.2 amps
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 663862320459
ExternallyAssignedProductIdentifier2 : 0663862320459
IncludedComponents : 1 generator, 1 pair of jumper cables, 1 LED, 1 resistor
ItemName : Walfront USB Interface Board, USB CNC Controller 4 Axis Motion Control Card, Interface Board for Stepper Motor Driver
ItemPackageDimensions_Height : 21.7 centimeters
ItemPackageDimensions_Length : 3.2 centimeters
ItemPackageDimensions_Width : 17.3 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : Walfront
Material : copper
ModelNumber : Walfrontx8adt7mibn
NumberOfItems : 10
NumberOfPoles : 1
PartNumber : Walfrontx8adt7mibn
ProcessorCount : 8
ProductDescription :

This type of the USB CNC Controller Card of strong anti-interference ability, the frequency converter interface isolated from the computer and the main control circuit,. The interference will not be introduced because of the introduction of the external strong current equipment.

The interface output 0-10V analog , also can be configured as 0-5V output, convenient for you to choose the type you need. To make the system more stable, you can use external 24V DC power supply to isolate USB and external port.

Super USB interface motion control card, drive, simple configuration and good compatibility. Especially designed for notebook and tablet PC, support for 4-axis linkage, you can connect four stepper motor drives or servo drives. 

Specifications: 

Size: 80×77mm/3.15×3.03inches

Weight: 160g/0.35lb

 

Package List: 

1×USB CNC Controller Card
1×USB cable
1×CD

Note: 

1, For this electronic product, pls care don't touch the water when you use it, or the circuit will be damaged and has a shorter service life.

2, Please allow small errors in the dimensions due to accidental imprecise manual measurement.

ProductSiteLaunchDate : 2017-10-26T09:10:45.264Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 43201503
Voltage : 12 volts