Cart 2 india

Specification
Brand : Purewords
BulletPoint1 : →【Targeted CNC router & SPECIAL ATTENTION】: Designed for 3 Axis CNC router 1610; 2418; 3018, Managed by Software 0.9J USB GRBL Controller. There MIGHT BE certain tuning or adjustment you need to process if your CNC router IS NOT CRONOS control board based, contact us if IT NOT WORKS !!!
BulletPoint2 : Input voltage: 12-36V; Laser output: 12V ; 775 motor output 24V. 　.
BulletPoint3 : Stepper motor driver: A4988 /Support stepper motor: 12V, maximum current of 2A ; recommended within 1.5A ; Support stepper motor 42, 57
BulletPoint4 : Laser output 2P/3P supports pwm TTL function
BulletPoint5 : Master chip: atmel 328P (arduino nano).
CircuitBreakerType : Standard
Color : L293D Stepper Motor Drivers Controller
Color1 : Blue
Color2 : Silver
CurrentRating : 1.2 amps
ExternallyAssignedProductIdentifier1 : 0606321445171
ExternallyAssignedProductIdentifier2 : 606321445171
IncludedComponents : 1 generator, 1 pair of jumper cables, 1 LED, 1 resistor
ItemName : Purewords GRBL 0.9 or 1.1 Controller Control Board 3Axis Stepper Motor Double Y Axis USB Driver Board for CNC Laser Engraver
ItemPackageDimensions_Height : 16.5 centimeters
ItemPackageDimensions_Length : 4.9 centimeters
ItemPackageDimensions_Width : 13.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : Purewords Technology
Material : Aluminum
ModelNumber : Wal front1e9uidnpho
NumberOfItems : 10
NumberOfPoles : 1
PartNumber : Crs-02
ProductDescription : Specifications:
Model：D8-MOTOR80
Drive voltage: 9-12V DC (drive: 16219)
Current per phase: 800 ma/phase
Coil resistance: 15  10%Ω/phase
No.of phases: 2 phases
Step angle: 18 ./step
Excitation method：1-2 phase excitation
Drive mode：Bipolar drive
Pull-out thrust：500g  at 125pps
response frequency：1600 pps
starting frequency：1100 pps  
Insulation class：Class E  
Insulation strength：100vac one second
Insulation resistance：50M DC 500V
Operating temperature：0~+55℃
Motor surface temperature：80℃
Thread Rod Diameter：3mm
Thread Rod Length: 90mm
Slide Block Stroke: 80mm
Thread Rod Pitch: ±0.5mm
Length: 10.3cm/4.1in
Weight: 50g (approx.)

Package Includes:
1 x Motor with Linear Slide 

ProductSiteLaunchDate : 2020-06-01T01:35:28.540Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111700
Voltage : 12 volts