Cart 2 india

Specification
Brand : gernie
BulletPoint1 : Onboard TB6612FNG double H-bridge motor drive chip, work efficiently, not easy to heat.
BulletPoint2 : Using I2C interface control, this driver can connect up to 32 modules by changing 5 address jumpers.
BulletPoint3 : Onboard PCA9685 chip, can output 12-bit hardware to PWM control motor speed.
BulletPoint4 : Reserve the I2C control interface to facilitate the connection with other main control boards.
BulletPoint5 : Based on Raspberry Pi interface design, suitable for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.
ExternallyAssignedProductIdentifier : 7903687227988
IncludedComponents : No
ItemName : Motor Driver for Raspberry Pi Driver Board for Motor Replacement, Raspberry Pi Motor Driver HatBoard I2C Interface Positive Coated Sensitized Prototyping Boards
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 7 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemTypeKeyword : telescope-motor-drives motor-drives
Manufacturer : gernie
ModelName : gernie73z95fwc0m
ModelNumber : gernie73z95fwc0m
NumberOfItems : 1
PartNumber : gernie73z95fwc0m
ProductDescription : 1. Based on Raspberry Pi interface design, suitable for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.
2. Using I2C interface control, this driver can connect up to 32 modules by changing 5 address jumpers.
3. Onboard PCA9685 chip, can output 12-bit hardware to PWM control motor speed.
4. Onboard TB6612FNG double H-bridge motor drive chip, work efficiently, not easy to heat.
5. Reserve the I2C control interface to facilitate the connection with other main control boards.

Specification:
This is a motor driver board specially designed for Raspberry Pi. Using I2C interface control, this module can drive 2 way DC motors at the same time. A good choice for DIY smart car.
Features:
1. Based on Raspberry Pi interface design, suitable for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.
2. Using I2C interface control, this driver can connect up to 32 modules by changing 5 address jumpers.
3. Onboard PCA9685 chip, can output 12-bit hardware to PWM control motor speed.
4. Onboard TB6612FNG double H-bridge motor drive chip, work efficiently, not easy to heat.
5. Reserve the I2C control interface to facilitate the connection with other main control boards.
6. Onboard 5V voltage regulator chip, output up to 3A current.
7. This driver can be powered by connecting the VIN terminal to the battery.

Specification:
Supply voltage: 6V-12V (VIN terminal)
Logic voltage: 3.3V
output current: 3A
PWM drive chip: PCA9685
Control interface: I2C
Motor drive chip: TB6612FNG
Weight: Approx. 26g

Package list:
1 * Motor Driver Board
1 * Set of Screws


ProductSiteLaunchDate : 2024-04-10T20:08:28.379Z