Cart 2 india

Specification
Brand : YFUSET
BulletPoint1 : This module uses a professional motor driver chip with built-in low on-resistance MOSFET switches, resulting in low heating; therefore, a heatsink is not required, and it can replace the L298N.
BulletPoint2 : The module can operate two channels at 1A each, with a peak current of up to 2A. The built-in overheat protection circuit prevents motor damage from stalling and automatically resets after the temperature decreases.
BulletPoint3 : The module Dimensions: 24.7mm (L) × 21mm (W) × 5mm (H) / 0.97in × 0.83in × 0.20in; Weight: 5g / 0.18oz. The module is compact and lightweight, making it easy to carry, and it has zero standby current.
BulletPoint4 : This module operates at a supply voltage of 2V-10V and can drive two DC motors or one 4-wire bipolar stepper motor simultaneously, suitable for battery-powered smart cars, toy cars, and robots.
BulletPoint5 : Package Includes: 6PCS Mini Dual DC Motor Driver Modules for easy replacement and support for multiple simultaneous projects, saving time.
Color : Black
ExternallyAssignedProductIdentifier1 : 0768383220445
ExternallyAssignedProductIdentifier2 : 768383220445
IncludedComponents : module
ItemName : 6PCS L298N Mini DC Motor Driver Module 1.5A 2-Way PWM Speed Control Dual H-Bridge Stepper Motor Driver Module for Smart Cars and Robots
ItemPackageDimensions_Height : 0.2 inches
ItemPackageDimensions_Length : 0.19 inches
ItemPackageDimensions_Width : 0.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-motor-drives
Manufacturer : YFUSET
Material1 : Plastic
Material2 : Alloy Steel
ModelName : UIM4247CM
ModelNumber : ZGW-39
NumberOfCircuits : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ZGW-39
ProductDescription :

Product Parameters:

Name: Mini Dual DC Motor Driver Module

Dual H-Bridge motor driver, capable of simultaneously driving two DC motors or one 4-wire bipolar stepper motor.

Module supply voltage: 2V-10V

Signal input voltage: 1.8-7V

Single channel operating current: 1A, peak current up to 2A, low standby current (less than 0.1μA)

Built-in anti-cross-conduction circuit; the motor will not misoperate when the input is floating.

Built-in over-temperature protection circuit with hysteresis effect (TSD); no need to worry about motor stalling.

Module dimensions: 24.7mm (L) × 21mm (W) × 5mm (H) / 0.97in × 0.83in × 0.20in; ultra-compact, space-saving design.

Mounting hole diameter: 2mm

Weight: 5g / 0.18oz

Applications:

Suitable for battery-powered smart cars, toy cars, robots, and similar projects.

Notes:

Reversing the power supply polarity will definitely damage the circuit.

Short-circuiting the output to ground or short-circuiting the output terminals, combined with motor stalling, will trigger chip thermal protection. However, voltages close to or exceeding 10V with peak currents significantly over 2A may cause the chip to burn out.

ProductSiteLaunchDate : 2024-09-14T10:25:38.144Z
Size : NEMA 17
Speed : 3000 rpm
Style : Incremental Encoder
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 24 volts_of_direct_current