Cart 2 india

Specification
Brand : Eaton
BulletPoint : 1
BulletPoint1 : Part Number: 684-1221-012, 684-1221-012-02, HYD01633, 16160410, 56131K, 5794K-1, 56131, 56131K-2, W56134, W56131K, 25634, 1306317, B80051, 56134, SO51189
BulletPoint10 : If your application requires a sealed or submersible design, you must have this one.Sealed design protects against dust and water jets. IP67 environmental rating allows it to be submerged into 1 meter of water for a period of 30 minutes. It is not intended to operate under water. If this unit is exposed to water and completely dried off afterwards, it should be capable of being energized again.
BulletPoint2 : Voltage: 12V
BulletPoint3 : Carry Current 150 Amps, Inrush 800 Amps
BulletPoint4 : Terminals: 4
BulletPoint5 : Duty cycle: 100% continuous duty
BulletPoint6 : Mounting Type: 180-degree Flat-Bracket
BulletPoint7 : Coil terminals: (2) Non-Grounded 10-32 Studs
BulletPoint8 : Contact studs: (2) 5/16-24
BulletPoint9 : Contact material: Copper
CircuitBreakerType : Standard
Color : MC-32a AC 24V
ConnectorType : 180-degree Flat-bracket
CurrentRating : 150 amps
ExternallyAssignedProductIdentifier : 6409896008215
ExternallyAssignedProductIdentifier1 : 0717623947246
ExternallyAssignedProductIdentifier2 : 717623947246
IncludedComponents : 1X Solenoid Relay
InputVoltage : 12 volts
ItemName : Eaton XTCE007B10 3 Pole contactor Rated at 7 AMPS with a 220/240 Volt AC Coil and 1 N.O. Base Contact
ItemPackageDimensions_Height : 1.77 inches
ItemPackageDimensions_Length : 3.14 inches
ItemPackageDimensions_Width : 2.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motor-contactors
Manufacturer : Eaton
Material : Copper
Material1 : plastic
Material2 : metal
MaximumSwitchingCurrent : 40 amps
MeasurementSystem : Inch
ModelName : NuNeth
ModelNumber : Compatible with Western Fisher Snow Plow
MountingType : 180-degree Flat-Bracket
NumberOfContacts : 1
NumberOfItems : 1
NumberOfPoles : 1
OperatingVoltage : 12 volts
PartNumber : XTCE007B10B
PhaseType : Three Phase
ProductDescription : Part Number:
684-1221-012, 684-1221-012-02, HYD01633, 16160410, 56131K, 5794K-1, 56131, W56134, W56131K, 25634, 1306317, B80051

Specification:
Voltage: 12V
Carry Current 150 Amps, Inrush 800 Amps
Terminals: 4
Duty cycle: 100% continuous duty
Mounting Type: 180-degree Flat-Bracket
Coil terminals: (2) Non-Grounded 10-32 Studs
Contact studs: (2) 5/16-24
Contact material: copper
Sealed Design protects against dust and water jets.

If your application requires a sealed or submersible design, you must have this one.Sealed design protects against dust and water jets. IP67 environmental rating allows it to be submerged into 1 meter of water for a period of 30 minutes. It is not intended to operate under water. If this unit is exposed to water and completely dried off afterwards, it should be capable of being energized again.

Mounting Instructions:
1. Select a desired mounting location
2. Using the contactor as a template, mark the centers of the mounting holes.
3. Using a ¼” drill bit, drill the holes marked in the previous step.
4. Mount the contact using ¼’ bolts and nuts.
5. Wire the relay according to the wiring diagram
ProductSiteLaunchDate : 2014-02-06T23:42:34.694Z
Size : One Size
SpecificationMet : 1
SpecificationMet1 : CSA
SpecificationMet2 : CE
SpecificationMet3 : IEC
SpecificationMet4 : UL
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 39121500
Voltage : 600 volts
Voltage1 : 230 volts
Voltage2 : 460 volts
Wattage : 1.4 kilowatts