Cart 2 india

Specification
BatteriesIncluded : 1
BatteriesRequired : 1
Brand : Generic
BulletPoint1 : VIN This is the main 2.7 V to 5.5 V power supply connection. The SCL and SDA level shifters pull the I 2.C lines high to this level.
BulletPoint2 : GND The ground (0 V) connection for your power supply. Your I 2.C control source must also share a common ground with this board.
BulletPoint3 : SDA/SDI/SDO Level-shifted I 2.C data line: HIGH is VIN, LOW is 0 V
BulletPoint4 : SCL/SPC Level-shifted I 2.C clock line: HIGH is VIN, LOW is 0 V
BulletPoint5 : GPIO0/CE This pin is configured as a chip enable input on power-up of the VL6180X. the board pulls it up to VDD to enable the sensor by default. Driving this pin low puts the sensor into hardware standby. After the VL6180X powers up, this pin can be reconfigured as a programmable interrupt output (VDD logic level). This input/output is not level-shifted.
BulletPoint6 : Advanced Detection: The combination of PIR and microwave technologies offers a more sophisticated and reliable way to detect motion, making it ideal for sensitive security applications where performance is critical.
BulletPoint7 : Improved Environmental Adaptability: The adaptive nature of the technology means the sensor can adjust to changes in the environment, providing greater reliability in complex or changing conditions.
BulletPoint8 : Connect with Alexa — Hear custom notifications from Echo Dot, launch video with Echo Show, and enjoy hands-free home monitoring with select Alexa-enabled devices.
Color : Venetian Bronze
IncludedComponents : Sensor
ItemName : Wiring Connecting Terminals - 4pcs HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 5 inches
ItemPackageDimensions_Width : 5 inches
ItemTypeKeyword : motion-detectors
Manufacturer : CHIKIMIKI
MaximumRange : 35 inches
ModelName : NA-C-100STE Adaptive Double Technology PIR/Microwave Motion Sensor – Coverage, Enhanced Detection & Reduced False Alarms
ModelNumber : NA-C-100STE
MountingType : Wall Mount
NumberOfItems : 1
OperatingTemperature : 60 degrees_celsius
PartNumber : CNCKF4EFC4400D4EA2BF7331B88502150A63
PowerSourceType : Corded Electric
ProductDescription : HC-SR501 Adjust IR Pyroelectric Infrared PIR Motion Sensor Detector Module
Quantity:4pcs
Color: White + Green
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Infrared sensor with control circuit board
The sensitivity and holding time can be adjusted
Working Voltage Range: DC 4.5V- 20V
Current drain:<60uA
Voltage Output: High/Low level signal:3.3V TTL output
Detection distance: 3--7M(can be adjusted)
Detection range: <140
Delay time: 5-200S(can be adjusted, default 5s +-3%)
Blockade time: 2.5 S (default)
Trigger: L: Non-repeatable trigger H: Repeat Trigger (default)
Work temperature:-20-+80 C
Trigger Method: L unrepeatable trigger / H repeatable trigger
We hope our each item will be a surprise to you, but in case it is not acceptable to you, hesitate to , and do our best to help with your problem mainly through the following 2 solutions: we can provide free replacement. 100% . You may the purchased item within after receiving and fully
ProductSiteLaunchDate : 2024-11-10T09:49:52.559Z
RecommendedUsesForProduct : Home, Office, Jewelry store
StreetDate : 2024-09-04T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 46171600