Cart 2 india

Specification
Brand : Optex
BulletPoint1 : Inovonics EN1941 wireless transmitter and battery pre-installed
BulletPoint2 : Mounting height 7ft. to 10ft.
BulletPoint3 : Mounting height 7ft. to 10ft.
BulletPoint4 : Double conductive shielding
BulletPoint5 : Advanced temperature compensation logic
ExternallyAssignedProductIdentifier1 : 0788924087894
ExternallyAssignedProductIdentifier2 : 788924087894
ItemName : Optex iSeries Wireless High Mount Outdoor PIR Motion Detector (HX-80NRAMi)
ItemPackageDimensions_Height : 5 inches
ItemPackageDimensions_Length : 12 inches
ItemPackageDimensions_Width : 8 inches
ItemPackageQuantity : 1
ItemTypeKeyword : motion-detectors
Manufacturer : Optex
MaximumRange : 80 feet
PartNumber : HX-80NRAMI
PowerSourceType : Battery Powered
ProductDescription : The Optex iSeries HX-80NRAMi is a high-mount, battery-powered, outdoor passive infrared detector with Anti-Masking that provides the stability and reliability necessary for an outdoor PIR sensor. The iSeries version comes with an Inovonics EN1941 transmitter and batteries pre-installed, and allows installers to save valuable installation time and labor costs because no trenching, installing conduit, or pulling wire is required. The most important element in a reliable outdoor detector is accuracy to distinguish a human from a small animal. The exclusive pyro element on board enables the HX to project an ideal detection pattern, thus allowing for more accurate detection of humans and fewer false alarms. In addition, the HX-80NRAMi's dual PIRs and 20 detection zones utilize the 'AND' detection pattern technology - upper and lower detection areas have to be activated to generate an alarm condition. This technology helps to prevent false alarms caused by a pet or small animal. The HX Series' detection length can be limited to avoid unwanted detection, and it's short-range zones can be masked if needed. By limiting the detection range, false alarms due to unwanted movement (cars, persons, or animals outside the protected area) can be eliminated.
ProductSiteLaunchDate : 2015-01-01T23:15:07.793Z