Cart 2 india

Specification
Brand : SUNGOOYUE
BulletPoint1 : [Easy Installation] Comes with fixed bolt holes for easy installation and a lighter flame test distance of 80cm.
BulletPoint2 : [Adjustable Sensitivity] Features adjustable sensitivity using a blue digital potentiometer for precision.
BulletPoint3 : [Detects Flame Efficiently] Can detect flames or light in the 760~1100nm wavelength range, with a detection angle of 60 degrees.
BulletPoint4 : [High Precision] Equipped with an adjustable precision potentiometer, suitable for flame alarm applications and achieving higher accuracy in detection.
BulletPoint5 : [Clean Signal Output] Comparator output ensures a clean signal, good waveform, and strong driving ability of more than 15ma.
IncludedComponents : No
ItemName : IR Flame Sensor Module Smartsense Detector for Detecting Flame 5 Pcs
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 5 centimeters
ItemPackageDimensions_Width : 3 centimeters
ItemTypeKeyword : motion-detectors
ItemTypeName : Motion Detectors
Manufacturer : SUNGOOYUE
ModelName : SUNGOOYUEobzad57i2f
ModelNumber : SUNGOOYUEobzad57i2f
NumberOfItems : 1
PartNumber : SUNGOOYUEobzad57i2f
ProductDescription : [Easy Installation] Comes with fixed bolt holes for easy installation and a lighter flame test distance of 80cm.
[Adjustable Sensitivity] Features adjustable sensitivity using a blue digital potentiometer for precision.
[Detects Flame Efficiently] Can detect flames or light in the 760~1100nm wavelength range, with a detection angle of 60 degrees.
[High Precision] Equipped with an adjustable precision potentiometer, suitable for flame alarm applications and achieving higher accuracy in detection.
[Clean Signal Output] Comparator output ensures a clean signal, good waveform, and strong driving ability of more than 15ma.

Spec:

Features:
Can detect a flame or the light of 760~ 1100nm wavelength, lighter flame test distance of 80cm, for the greater flame, the farther the distance test.
The detection angle is about 60 degrees, particularly sensitive to the flame spectrum.
Sensitivity is adjustable (shown in blue digital potentiometer adjustment).
Comparator output, signal clean, good waveform, strong driving ability, more than 15mA.
With adjustable precision potentiometer for sensitivity adjustment.
With fixed bolt holes for easy installation.
Specifications:
The working voltage: 3.3V 5V
The output format: DO digital switching outputs (0 and 1) and AO analog voltage output
Comparator: wide voltage LM393
Length: 4.5cm / 1.77in
Weight: 4g
Wiring instructions:
Product wiring description:
VCC: 3.3 5V power supply +
GND: power supply -
DO: TTL switch signal output.
AO: analog signal output (voltage signal)
Instructions for use:
1. the flame sensor is most sensitive to flame, for ordinary light, it is also responsive
, generally used as a flame alarm purposes.
2. the output interface can be directly connected to the micro controller IO port.
3. The sensor must be kept at a distance from the flame to avoid damage to the sensor.
ProductSiteLaunchDate : 2024-05-21T10:26:14.332Z