Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Features 1024*600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Back light control to lower power consumption Development Resources Wiki:waveshare/wiki/10.1inch_HDMI_LCD FAQ Why the LCD doesn't work with my Raspbian? --To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? --Make sure the hardware connection is correct and connects fine. -- Make sure the image in TF card is burnt correctly. --The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use? --It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD. For more info, please check the wiki page. Package Contains 10.1inch HDMI LCD X 1 HDMI connector X 1 Touch pen X 1 RPi screws pack (4pcs) X 1 DVD X 1
Features
1) 10.1inch Resistive Touch Screen LCD, HDMI interface, 1024600 high resolution,Designed for Raspberry Pi
2) Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
3) Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly)
4) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
5) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os); Back light control to lower power consumption
Specification
Binding : Electronics
Brand : Waveshare-LCD
EAN : 0614961950108
Label : Waveshare
Manufacturer : Waveshare
Model : 10.1inch HDMI LCD ()
PackageDimensions_Weight : 1.60 pounds
PackageDimensions : L:11.89 X W:8.43 X H:1.97
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COMPONENT
Publisher : Waveshare
Studio : Waveshare
Title : Waveshare 10.1inch HDMI LCD Resistive Touch Screen 1024*600 High Resolution Display Designed for Raspberry Pi A+/B/ B+/2 B/3 Model B
10.1inch Resistive Touch Screen LCD, HDMI interface, Designed for Raspberry Pi Features 1024*600 high resolution Resistive touch control Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable) Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os) Back light control to lower power consumption Development Resources Wiki:waveshare/wiki/10.1inch_HDMI_LCD FAQ Why the LCD doesn't work with my Raspbian? --To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our provided image directly. Why the LCD still doesn't work with the Waveshare provided image? --Make sure the hardware connection is correct and connects fine. -- Make sure the image in TF card is burnt correctly. --The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Which power supply should I use? --It is strongly recommended to use a stand-alone 5V/2A power adapter, because the PC's USB port might have not enough power to support the Pi and LCD. For more info, please check the wiki page. Package Contains 10.1inch HDMI LCD X 1 HDMI connector X 1 Touch pen X 1 RPi screws pack (4pcs) X 1 DVD X 1
Features
1) 10.1inch Resistive Touch Screen LCD, HDMI interface, 1024600 high resolution,Designed for Raspberry Pi
2) Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
3) Raspbian/Ubuntu Drivers are provided (works with your own Raspbian/Ubuntu directly)
4) Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
5) HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os); Back light control to lower power consumption
Specification
Binding : Electronics
Brand : Waveshare-LCD
EAN : 0614961950108
Label : Waveshare
Manufacturer : Waveshare
Model : 10.1inch HDMI LCD ()
PackageDimensions_Weight : 1.60 pounds
PackageDimensions : L:11.89 X W:8.43 X H:1.97
ProductGroup : PC Accessory
ProductTypeName : COMPUTER_COMPONENT
Publisher : Waveshare
Studio : Waveshare
Title : Waveshare 10.1inch HDMI LCD Resistive Touch Screen 1024*600 High Resolution Display Designed for Raspberry Pi A+/B/ B+/2 B/3 Model B
