Cart 2 india

Specification
BatteriesIncluded : 1
Brand : DAOKAI
BulletPoint1 : Product: Name:MOSFET Driver Module.Using original power MOS tube, can adjust PWM output. By PWM adjustable can realize stepless dimming LED, motor stepless speed regulation.
BulletPoint2 : Parameters: Voltage: 3.3V, 5V, Output load voltage: 0-24V, Output load current: <5A (1A above need to add heat sink), Dimension: 33 x 24mm/1.29 x 0.94in.
BulletPoint3 : Feature: Allows for Arduino to drive loads up to 24V, such as LED strips, DC motors, micro water pumps, solenoid valves.
BulletPoint4 : Notice: The heat sink must be installed to drive a load above 1A, drive 1A above need to add heat sink.
BulletPoint5 : Package includes: You will get 10 x MOSFET Driver Module, 1 x 30pin Female to Male Dupont Cable
Color : Driver Module
ExternallyAssignedProductIdentifier : 8856661262897
ExternallyAssignedProductIdentifier1 : 0788505983614
ExternallyAssignedProductIdentifier2 : 788505983614
IncludedComponents : 10 x MOSFET Driver Module, 1 x 30pin Female to Male Dupont Cable
ItemName : DAOKAI 10PCS Driver Module MOSFET Tube Field Effect Tube Board 3.3V 5V PWM Regulation MOSFET Button MCU Driver Module for Arduino with Dupont Cable
ItemPackageDimensions_Height : 18 centimeters
ItemPackageDimensions_Length : 3.7 centimeters
ItemPackageDimensions_Width : 13.2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : mosfet-transistors
Manufacturer : DAOKAI
Material : Copper
ModelNumber : WE-DA-058
NumberOfBoxes : 1
NumberOfItems : 10
PartNumber : WE-DA-058
ProductDescription : Describe:
Dimensions: 33x24mm/1.29x0.94in
Weight: 10 grams
Voltage: 3.3V, 5V
Port: Digital Level
Output load voltage: 0-24V
Output load current: <5A (a heat sink is required for more than 1A)
Platform: for arduino, MCU, for ARM, for Raspberry Pi
Using the original Power Mos, you can adjust the output PWM
for Arduino can drive loads up to 24V, such as LED lights, DC motors, micro pumps, solenoid valves, etc.
PWM dimming LED can be used to achieve stepless dimming, variable speed motor

Instructions for use:
1. The PWM signal is active high.
2. When the PWM is high level (3.3V-5.0V): the power supply voltage is between V+ and V-, the work indicator is on, and the load is working.
3. When PWM is low level (0V-0.5V): between V+ and V- is 0, the work indicator is off, and the load does not work.
4. The VCC pin layout is useless, V+ and VIN are connected, and the two GNDs are connected.
Note: To drive a load above 1A, a heat sink needs to be installed!

Package includes:
10 x MOSFET Driver Module
1 x 30pin Female to Male Dupont Cable

ProductSiteLaunchDate : 2023-01-31T01:59:55.599Z
Size : 100 Piece
SupplierDeclaredDgHzRegulation : not_applicable
Voltage : 24 volts