Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Features
1) Dimensions: 4" x 2" x 1.25"
2) What better way to advertise the special ingredient in your goat milk soaps than by letting folks read GOAT MILK right on the bar? The Goat Milk Soap Mold Tray also has a simple floral border and makes eight rectangular Bars.
3) Material: Clear PVC (Not Approved for Food Contact)
4) Care: Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
5) Maximum Product Pour Temp: 145F. If you pour at a hotter temperature, your mold will likely warp.
Specification
Brand : Milky Way
EAN : 0709112465157
Label : Milky Way
Manufacturer : Milky Way
PackageDimensions_Weight : 0.05 pounds
PackageDimensions : L:9.60 X W:9.20 X H:1.60
ProductGroup : Home
ProductTypeName : HOME_BED_AND_BATH
Publisher : Milky Way
Studio : Milky Way
Title : Milky Way Dragon Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 271
The designs for Milky Way's award-winning soap molds are sculpted for the finest details available. They are suitable for hobbyists and professional soap makers. Soap is easist to release 12-24 hours after cooling. Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold. Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster. Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Features
1) Dimensions: 4" x 2" x 1.25"
2) What better way to advertise the special ingredient in your goat milk soaps than by letting folks read GOAT MILK right on the bar? The Goat Milk Soap Mold Tray also has a simple floral border and makes eight rectangular Bars.
3) Material: Clear PVC (Not Approved for Food Contact)
4) Care: Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
5) Maximum Product Pour Temp: 145F. If you pour at a hotter temperature, your mold will likely warp.
Specification
Brand : Milky Way
EAN : 0709112465157
Label : Milky Way
Manufacturer : Milky Way
PackageDimensions_Weight : 0.05 pounds
PackageDimensions : L:9.60 X W:9.20 X H:1.60
ProductGroup : Home
ProductTypeName : HOME_BED_AND_BATH
Publisher : Milky Way
Studio : Milky Way
Title : Milky Way Dragon Soap Mold Tray - Melt and Pour - Cold Process - Clear PVC - Not Silicone - MW 271
