Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
The set includes: Cylinder: (,,-1: height: 5.9 in diameter: 1.6 in, ,,-2:height: 5.1 in, width: 1.9 in, ,,-3: height: 5.9 in, width: 2.3 in,,,-4: height: 5.1 in, width: 2.7 in), Ball: (,,-1 - diameter: 2.5 in, ,,- 2 - diameter: 3.1, ,,- 3 - in diameter: 3.9 in), Egg: (,,-1 - height: 2 in, width: 1.6 in, ,,-2 - height: 3.5 in, width: 2.3 in), Classic mold - height: 9.4 in, width: 0.47 in, Pyramid mold - height: 6.3 in, width: 2.7 in, Сylinder Rif mold - height: 3.1 in, width: 2.7 in We offer molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times. Important to know: 1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 °F degrees), poor wax quality. 2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 °F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold. 3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle. 4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 °F degrees).
Features
1) QUALITY: Candle molds are made of an engineered plastic. The material is resistant to high and low temperatures (from -4 to 248 F). These are the ultimate quality for your candle making whether you are new at this or with a lot of experience.
2) CONSTRUCTION: The molds are divided into two parts: the body and the lid, to make it easier to comfortably take a candle out. Candle molds are for paraffin, wax, beeswax. The molds are extremely durable. Will last a lifetime.
3) Safety: We offer molds for candles of caprolon engineering. They are suitable for casting paraffin, wax, beeswax and other bases. Caprolon is very durable and the molds can be reused multiple times. The molds can withstand high and low temperatures without damage and/or cracking. There is no harm from the materials used.
4) BUY CONFIDENTLY - 100% money back guarantee. If for some reason, within 30 days of purchase you are not satisfied with our product, you can exchange it for a different one or get your money back, no questions asked.
5) QUANTITY: The set includes: Cylinder: (1: height: 5.9 in diameter: 1.6 in, 2: height: 5.1 in, width: 1.9 in, 3: height: 5.9 in, width: 2.3 in, 4: height: 5.1 in, width: 2.7 in), Ball: (1 - diameter: 2.5 in, 2 - diameter: 3.1, 3 - in diameter: 3.9 in), Egg: (1 - height: 2 in, width: 1.6 in, 2 - height: 3.5 in, width: 2.3 in), Classic mold - height: 9.4 in, width: 0.47 in, Pyramid mold - height: 6.3 in, width: 2.7 in, Cylinder Rif mold - height: 3.1 in, width: 2.7 in
Specification
Binding : Office Product
Brand : Candle Shop
EAN : 0646412948648
Label : Candle Shop
Manufacturer : Candle Shop
Model : CM
PackageDimensions_Weight : 2.70 pounds
PackageDimensions : L:14.61 X W:8.11 X H:4.49
ProductGroup : Art and Craft Supply
ProductTypeName : ART_SUPPLIES
Publisher : Candle Shop
Size : 12 in 1
Studio : Candle Shop
Title : Candle Shop - Candle Molds set (12 candle molds) - 120 ft. of wick included as a gift - Plastic candle molds for making candles
The set includes: Cylinder: (,,-1: height: 5.9 in diameter: 1.6 in, ,,-2:height: 5.1 in, width: 1.9 in, ,,-3: height: 5.9 in, width: 2.3 in,,,-4: height: 5.1 in, width: 2.7 in), Ball: (,,-1 - diameter: 2.5 in, ,,- 2 - diameter: 3.1, ,,- 3 - in diameter: 3.9 in), Egg: (,,-1 - height: 2 in, width: 1.6 in, ,,-2 - height: 3.5 in, width: 2.3 in), Classic mold - height: 9.4 in, width: 0.47 in, Pyramid mold - height: 6.3 in, width: 2.7 in, Сylinder Rif mold - height: 3.1 in, width: 2.7 in We offer molds for candles of caprolon engineering. They are suitable for casting wax, paraffin, and other bases. The material is resistant to high and low temperatures, so the form does not crack or split in service. Caprolon can be in contact with paraffin additives and acidic environments without any harm. Due to the durability of caprolon, the candle molds can be used unlimited number of times. Important to know: 1. Why is the surface porous? The pores on the surface of a candle may be formed from the low pouring temperature (below 140 °F degrees), poor wax quality. 2. Why is there no gloss on the surface? The higher the casting temperature, the glossier the surface of the finished candle is. Do not exceed the fill temperatures of over 167 °F degrees as this may cause leakage of the candle mass and difficulty in pulling out the candle from the mold. 3. Why is the well formed? Candle mass expands when heated and decreases during solidification, so after its melting and gradual cooling there is a well that is formed in the center of the candle. 4. Why is the candle removed from the mold with difficulty? At high temperature of the wax there is an increase of the grip, the higher the temperature, the more cohesion is created and therefore it is more difficult to get the finished candle out of the mold. To avoid difficulties in removing, the mold needs to be lubricated before pouring and the temperature should not exceed the weight of candle (167 °F degrees).
Features
1) QUALITY: Candle molds are made of an engineered plastic. The material is resistant to high and low temperatures (from -4 to 248 F). These are the ultimate quality for your candle making whether you are new at this or with a lot of experience.
2) CONSTRUCTION: The molds are divided into two parts: the body and the lid, to make it easier to comfortably take a candle out. Candle molds are for paraffin, wax, beeswax. The molds are extremely durable. Will last a lifetime.
3) Safety: We offer molds for candles of caprolon engineering. They are suitable for casting paraffin, wax, beeswax and other bases. Caprolon is very durable and the molds can be reused multiple times. The molds can withstand high and low temperatures without damage and/or cracking. There is no harm from the materials used.
4) BUY CONFIDENTLY - 100% money back guarantee. If for some reason, within 30 days of purchase you are not satisfied with our product, you can exchange it for a different one or get your money back, no questions asked.
5) QUANTITY: The set includes: Cylinder: (1: height: 5.9 in diameter: 1.6 in, 2: height: 5.1 in, width: 1.9 in, 3: height: 5.9 in, width: 2.3 in, 4: height: 5.1 in, width: 2.7 in), Ball: (1 - diameter: 2.5 in, 2 - diameter: 3.1, 3 - in diameter: 3.9 in), Egg: (1 - height: 2 in, width: 1.6 in, 2 - height: 3.5 in, width: 2.3 in), Classic mold - height: 9.4 in, width: 0.47 in, Pyramid mold - height: 6.3 in, width: 2.7 in, Cylinder Rif mold - height: 3.1 in, width: 2.7 in
Specification
Binding : Office Product
Brand : Candle Shop
EAN : 0646412948648
Label : Candle Shop
Manufacturer : Candle Shop
Model : CM
PackageDimensions_Weight : 2.70 pounds
PackageDimensions : L:14.61 X W:8.11 X H:4.49
ProductGroup : Art and Craft Supply
ProductTypeName : ART_SUPPLIES
Publisher : Candle Shop
Size : 12 in 1
Studio : Candle Shop
Title : Candle Shop - Candle Molds set (12 candle molds) - 120 ft. of wick included as a gift - Plastic candle molds for making candles
