Editorial Review Mold Star® rubbers are easy to use platinum silicones which are mixed 1A:1B by volume (no weighing scale necessary). Mold Star® silicones feature relatively low viscosities and vacuum degassing is not required for most applications. Mold Star® silicones cure to soft, strong rubbers which are tear resistant and exhibit very low long term shrinkage. Molds made with Mold Star® will last a long time in your mold library and are good for casting wax, gypsum, resins, concrete and other materials. Cured Mold Star® rubber is heat resistant up to 450°F (232°C) and is suitable for casting low-temperature melt metal alloys. Note: THI-VEX® is NOT compatible with Mold Star® rubbers. MOLD STAR 20T: MIX RATIO: 1:1 by volume; POT LIFE: 6 minutes; DEMOLD TIME: 30 minutes; SHORE A: 20; COLOR: Transparent Read the MSDS before using. Consult the Technical Bulletin for further information. Adult Supervision Required. Keep Out of the Reach of Children.
Features 1) Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness 2) 6 min. pot life / 30 min. cure 3) Easy to Mix: mixed 1A:1B by volume (no weighing scale necessary) 4) Good for casting wax, gypsum, resins, concrete and other materials 5) Heat resistant up to 450F (232C)
Specification Binding : Office Product Brand : Smooth-On EAN : 0751635587410 Label : Smooth-On, Inc. Manufacturer : Smooth-On, Inc. PackageDimensions_Weight : 2.40 pounds PackageDimensions : L:8.00 X W:6.06 X H:3.15 ProductGroup : Art and Craft Supply ProductTypeName : ART_SUPPLIES Publisher : Smooth-On, Inc. Studio : Smooth-On, Inc. Title : Mold Star 20T Silicone Mold Making Rubber - Trial Unit