Cart 2 india
In2Cart
Rs. 0
0
Product Information
Editorial Review
Mikrosil has been formulated to give excellent rendering of small details, highest contrast for microscopic observations, good releasing ability for the cast, and short setting-time. These properties are important in cases of shallow marks and marks with small details requiring large magnification. Choose either brown, white, or black Mikrosil using the menu below the product photo.Brown Mikrosil is a dark-brown color which many toolmark examiners prefer. The dark color increases the visibility of detail in the casts made from toolmarks, firing pin marks, breech face marks and other marks on cartridge casings. Gray Mikrosil is preferred by other toolmark examiners who photograph the contrast between the light-colored surface and shadows produced from side-lighting. As described below, squeeze an equal length from each tube onto the mixing pad and stir them together with the wooden spatula. Press against the toolmark and wait for a few minutes. The hardened cast will easily release itself from the surface.White or Black Mikrosil can be used to lift dusted latent fingerprints from rough or textured surfaces where regular lift tape will fail. Using the method shown on the following page, press the mixed putty onto the latent print. Wait a minute or two to allow the putty to harden, then pull the card with the putty attached away from the surface. Properly label the lifted latent print. Use White Mikrosil with black powders and use Black Mikrosil with silver or fluorescent powders.Using Mikrosil to Lift Latent PrintsUse White Mikrosil to lift latent prints developed with black powder on an irregular surface. After dusting and developing latent prints, prepare the White Mikrosil . Apply it to the surface and allow it to dry. Gently peel it off. Remember that the latent prints will be reversed left to right (mirror image).Use Black Mikrosil when dusting with silver or white powders, or when dusting with fluorescent powders.
Specification
Brand : Crime Scene
Color : Black
EAN : 0727908585261
Label : Crime Scene
Manufacturer : Crime Scene
PackageDimensions_Weight : 0.80 pounds
PackageDimensions : L:0.00 X W:0.00 X H:0.00
ProductGroup : Home
ProductTypeName : ART_AND_CRAFT_SUPPLY
Publisher : Crime Scene
Studio : Crime Scene
Title : Mikrosil Casting Putty (Black)
Mikrosil has been formulated to give excellent rendering of small details, highest contrast for microscopic observations, good releasing ability for the cast, and short setting-time. These properties are important in cases of shallow marks and marks with small details requiring large magnification. Choose either brown, white, or black Mikrosil using the menu below the product photo.Brown Mikrosil is a dark-brown color which many toolmark examiners prefer. The dark color increases the visibility of detail in the casts made from toolmarks, firing pin marks, breech face marks and other marks on cartridge casings. Gray Mikrosil is preferred by other toolmark examiners who photograph the contrast between the light-colored surface and shadows produced from side-lighting. As described below, squeeze an equal length from each tube onto the mixing pad and stir them together with the wooden spatula. Press against the toolmark and wait for a few minutes. The hardened cast will easily release itself from the surface.White or Black Mikrosil can be used to lift dusted latent fingerprints from rough or textured surfaces where regular lift tape will fail. Using the method shown on the following page, press the mixed putty onto the latent print. Wait a minute or two to allow the putty to harden, then pull the card with the putty attached away from the surface. Properly label the lifted latent print. Use White Mikrosil with black powders and use Black Mikrosil with silver or fluorescent powders.Using Mikrosil to Lift Latent PrintsUse White Mikrosil to lift latent prints developed with black powder on an irregular surface. After dusting and developing latent prints, prepare the White Mikrosil . Apply it to the surface and allow it to dry. Gently peel it off. Remember that the latent prints will be reversed left to right (mirror image).Use Black Mikrosil when dusting with silver or white powders, or when dusting with fluorescent powders.
Specification
Brand : Crime Scene
Color : Black
EAN : 0727908585261
Label : Crime Scene
Manufacturer : Crime Scene
PackageDimensions_Weight : 0.80 pounds
PackageDimensions : L:0.00 X W:0.00 X H:0.00
ProductGroup : Home
ProductTypeName : ART_AND_CRAFT_SUPPLY
Publisher : Crime Scene
Studio : Crime Scene
Title : Mikrosil Casting Putty (Black)
