SpecificationBrand : WYDDDARY
BulletPoint1 : Versatile Mixing Applications: The 304 stainless steel liquid mixer is designed for thorough blending of various materials to achieve a homogeneous liquid. Ideal for industries including daily chemical, food, pharmaceutical, chemical, construction, aquaculture and other industries
BulletPoint2 : Ball Valve Discharge Hole: The liquid mixer incorporates a 304 stainless steel ball valve outlet, facilitating precise control over the discharge flow.The specification of the ball valve is 1 inch, with a height of about 50cm from the ground
BulletPoint3 : Adjustable Stirrer Height: Featuring a cross-shaped stirring rod, the height can be easily adjusted based on the volume of liquid. This ensures complete and even mixing within the barrel, enhancing efficiency
BulletPoint4 : Integrated Control Box: Equipped with a frequency converter inside, and there are corresponding controllers and timers outside the control box. Adjust the mixing speed (0 to 50) and timing without opening the box, providing quick and easy operation. Due to the characteristics of the motor, it should be avoided to run between 19 and 26 values
BulletPoint5 : Attention: Due to the variable positioning of the control box, the machine does not come with a power cord. Users should prepare two power cords to their desired lengths. The input power supply is 110V using a three-core wire. While four-core wires connect the control box to the motor
ExternallyAssignedProductIdentifier : 8461561793862
ExternallyAssignedProductIdentifier1 : 0198462823234
ExternallyAssignedProductIdentifier2 : 198462823234
ItemName : WYDDDARY Vertical Liquid Mixer 100L Stainless Steel Mixer Liquid Coating Mixing Machine 0-300rpm with Frequency Converter and Timer 110V
ItemPackageDimensions_Height : 74.8 inches
ItemPackageDimensions_Length : 28.74 inches
ItemPackageDimensions_Width : 28.74 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-mixers
Manufacturer : WYDDDARY
PartNumber : CD025270
ProductDescription :
Parameter:
Voltage: 110V
Power: 2.2KW
Capacity: 100L
Barrel Diameter: 23.6″(60cm)
Barrel Height: 31″(79cm)
Speed: 0-300rpm
Discharge Port: 1″Ball Valve
Discharge Port Height: 20.5″(52cm)
Note:
The brown yellow color at the welding points inside and outside the machine is the oxide generated during welding, not rust.
Attention:
Due to the unstable installation position of the control box, the machine does not come with a power cord. Please prepare two power cords according to the length you need.
The input power supply is 110V and a three core wire is used.
Four core wires are used to connect the control box to the motor.
Operating speed:
When adjusting the speed of the controller, the screen value is adjustable from 0 to 50. Due to the characteristics of the motor, it should be avoided to run between 19 and 26 values.
Timer Use:
1.Press ‘C' to reset the timer.
2.Press the ‘Set’ key, after the screen appears ‘ON’, you can set the working time by hour, minute, and second.
3.Press the ‘Start/Reset’ key to start or close the timer at any time.
ProductSiteLaunchDate : 2024-09-06T06:55:04.813Z
UnspscCode : 24100000