Cart 2 india

Specification
Brand : Banfluxion
BulletPoint1 : 【Timing Function】The mixing time can be set in advance. The timing unit can be hour and second. The maximum timing can be 99h99s.
BulletPoint2 : 【Speed】The maximum motor speed of this solder paste mixer machine can reach 2800rpm. The rotation speed of the stirring tank is 1120rpm.
BulletPoint3 : 【Even Mixing】This solder paste mixer machine can mix tin powder and solder paste evenly and the solder paste will not be oxidized or hydrated.
BulletPoint4 : 【Visually】This solder paste mixer machine has a visual window. You can easily observe the internal situation at any time.
BulletPoint5 : 【Convenience】This solder paste mixer machine is equipped with the handle on both sides, which is convenient to move this machine.
Color : Silver
ExternallyAssignedProductIdentifier1 : 0840403708482
ExternallyAssignedProductIdentifier2 : 840403708482
ItemDisplayDimensions_Length : 16.14 centimeters
ItemDisplayWeight : 0.21 pounds
ItemName : BANFLUXION 110V 60W Automatic Solder Paste Mixing Machine 2800rpm Tin Cream Mixer with 500g Solder Paste Pot
ItemPackageDimensions_Height : 19.69 inches
ItemPackageDimensions_Length : 20.47 inches
ItemPackageDimensions_Width : 20.47 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-mixers
ItemVolume : 1 cubic_centimeters
Manufacturer : Banfluxion
Material : Stainless Steel
ModelNumber : UC9U3VM0436LYUB073
NumberOfItems : 1
NumberOfLithiumMetalCells : 1
PartNumber : CB056820
ProductDescription :

Product Parameters

Voltage: AC110V/60Hz

Motor power: 60W

Specifications of solder paste pot that each fixture can hold: 500g solder paste pot

The diameter range in which a fixture can be clamped: 1.77"-2.56"(4.5cm-6.5cm)

Mixing material: Tin paste, ink, glue, etc

Motor speed: 2800rpm

Revolution speed of stirring tank: 1600rpm

Rotation speed of stirring tank: 1120rpm

Timing range: 1s-99h99s

Noise: ＜20DB

Packing size: 20.5"*20.5"*19.7"(52cm*52cm*50cm)

Net weight/Gross weight: 54LB(24.5kg)/73LB(33kg)

Attention:

1. If you want to open the upper cover of the machine after the operation, you must wait until the machine stops completely before opening it.

2. The weight difference of the solder paste pot or weight distributor on the left and right two fixtures should not exceed 100 grams. Otherwise, it will make the machine shake when stirring at high speed, please try to avoid it.

3. Check that all screws are not loose.

4. Check the condition of machine switch and upper cover before operation.

ProductSiteLaunchDate : 2024-07-27T00:38:51.916Z
Size : 41X7.5X1CM
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
Wattage : 60 watts