Cart 2 india

Specification
Brand : BIXIBIN
BulletPoint1 :
BulletPoint2 :
BulletPoint3 :
BulletPoint4 :
BulletPoint5 :
Capacity : 4 milliliters
Color : Round shape
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier1 : 0756804694425
ExternallyAssignedProductIdentifier2 : 756804694425
IncludedComponents : 1*Magnetic stirrer
ItemDisplayDimensions_Height : 0.5 inches
ItemDisplayDimensions_Length : 9 inches
ItemDisplayDimensions_Width : 6 inches
ItemDisplayWeight : 0.5 pounds
ItemName : 10L Lab Heat-gathering Magnetic Stirrer, DF-101T heat-collecting magnetic stirrer, Digital Laboratory Water Bath Pot 110V for experimenters
ItemPackageDimensions_Height : 8 centimeters
ItemPackageDimensions_Length : 42 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-stirrers
ItemVolume : 48 cubic_inches
Manufacturer : BIXIBIN
Material : plastic
ModelName : Kelepuov1946qzhx
ModelNumber : DF-101T
NumberOfItems : 1
PartNumber : DF-101T
ProductDescription :

product description:

DF-101T heat-collecting magnetic stirrer is widely used in universities, environmental protection, sanitation, epidemic prevention, petroleum, chemical, medical and other units.     The agitator has good performance, no noise, no vibration, and fast heating.     For experimenters, this is the ideal tool.

Product parameters:

Capacity: 10L

Voltage: 110V

Speed regulation range: 0-1400 RPM (stepless speed regulation)

Temperature control range: RT + 5-400℃

Temperature control method: intelligent constant temperature

Heating power: ≤1000W

Stirring power: 40W

Slot size: diameter 300mm*height 195mm

Gross weight: 12kg

Packing size: 32.00 x 32.00 x 32.00 cm

Material: Stainless steel

packing list:

Magnetic stirrer

Instructions:

1.     Turn on the power, prepare the cup, open the lid of the stainless steel container, place the cup in the middle of the stainless steel container, add thermal oil or silicone oil to the appropriate height in the stainless steel container, and pour the blender into the cup solution.     Turn on the power switch, the indicator light is on, and then turn the speed potentiometer clockwise to stir from slow speed to fast speed.     Adjust to the desired speed.

2.     When heating, fix the temperature probe on the bracket, and then move the bracket to insert the temperature sensor probe into the solution at least 5cm, but the stirring will not be affected.     Turn on the heating switch and set the desired temperature.

The digital display lights up and the current oil temperature is displayed on the upper row of the meter.     Set temperature: Press the SET button to set or check the temperature set point.     Press the SET key and the numeric tube character starts to flash, indicating that the instrument enters the setting state, press △ to increase the setting value, press the ▽ key to decrease, long press the △ or ▽ key, the data will change quickly, press the SET key again, the instrument returns to the normal working state.     Set up.

3.     If the agitator jumps during work, please turn off the power and then turn it back on.     The speed can be adjusted from slow to fast, and then work normally

Precautions:

◆To ensure your personal safety, please use a three-phase safety socket, and it is best to properly ground it when using it.

◆The instrument should be kept clean and tidy, and the power supply should be cut off if not used for a long time, and the switch should be turned off to avoid accidents.

◆When the stainless steel container is not filled with heat-conducting oil and the temperature sensor is not connected, please do not turn on the temperature control switch to avoid damage to the electric heating tube and the thermostat.

◆Please read the manual carefully before using this instrument to avoid unnecessary trouble.

ProductSiteLaunchDate : 2024-07-03T06:17:19.577Z
Size : US Plug 100V‑240V
Style : Beveled Edges, Single Frosted
SupplierDeclaredDgHzRegulation : not_applicable