Cart 2 india

Specification
Brand : Yuco
BulletPoint1 : The overload protector can play the role of over current protection and short circuit protection to protect the power circuit and avoid overheating due to overload. When the load is too large, it will automatically reset, and the power supply device will automatically disconnect the power supply. After disconnection, press the reset button switch to use it again.
BulletPoint2 : Circuit overload protector, is in size of : 4A current, AC125/250V DC32V, 2 pin, 47mm x 28mm x 13mm/1.85-inch x 1.1-inch x 0.51-inch(L*W*H) total size
BulletPoint3 : Push button manual reset, protection circuit; Waterproof button cap; Easy installation, simple operation; Small size, light weight, easy to carry
BulletPoint4 : Steps of installation: 1. Select overload protector with appropriate specification; 2. Remove the overload protector to be replaced; 3. Installation
BulletPoint5 : Please pay attention to select the overload protector with suitable specifications, especially the rated current and voltage of the overload protector
CircuitBreakerType : Standard
CurrentRating : 10 amps
ItemName : YC-10-1C with 6" Din Rail and 2 Screws Yuco Miniature Circuit Breaker C Curve 277/480VAC 115/220VDC (1 Pole, 10 Amp)
ItemPackageDimensions_Height : 15.7 centimeters
ItemPackageDimensions_Length : 1.7 centimeters
ItemPackageDimensions_Width : 9.9 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : miniature-circuit-breakers
Manufacturer : Yuco
Material : Plastic
ModelNumber : mea220107ee0681
MountingType : Pole Mount
NumberOfPoles : 1
PartNumber : YC-CCurve
ProductDescription : What is this?
The overload protector can play the role of over current protection and short circuit protection to protect the power circuit and avoid overheating due to overload. When the load is too large, it will automatically reset, and the power supply device will automatically disconnect the power supply. After disconnection, press the reset button switch to use it again.

What will I get?
Circuit overload protector, is in size of : 4A current, AC125/250V DC32V, 2 pin, 47mm x 28mm x 13mm/1.85-inch x 1.1-inch x 0.51-inch(L*W*H) total size
In the package of: 2pcs x Circuit overload protector, 2pcs x Waterproof button caps, 4pcs x Terminal, 4pcs x Terminal sleeve

Is there any advantages of the product?
Push button manual reset, protection circuit; Waterproof button cap; Easy installation, simple operation; Small size, light weight, easy to carry

How to use it?
Steps of installation: 1. Select overload protector with appropriate specification; 2. Remove the overload protector to be replaced; 3. Installation

What should I notice?
Please pay attention to select the overload protector with suitable specifications, especially the rated current and voltage of the overload protector


ProductSiteLaunchDate : 2019-06-27T14:00:00.000Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39121601
Voltage : 277 volts