Cart 2 india

Specification
AgeRangeDescription : adult
Amperage : 3.5 amps
Brand : WYDDDARY
BulletPoint1 : Application: The pellet machine is extremely outstanding in terms of energy conservation and efficiency. It helps us solve the problem of storing or treating agricultural and forestry waste such as corn straw scales, cotton stalks, wood bran, wood powder, sawdust, peanut shells, rice husks, etc
BulletPoint2 : Enlarge Feed Inlet & Discharge Port: The machine adopts the design of enlarged feed port, which makes it more convenient for you to feed and effectively improves work efficiency. The enlarged and widened discharge port to prevent feed splashing and facilitate the collection of feed by customers
BulletPoint3 : Add Oil: After using the machine for approximately 4-6 months, the customer needs to add grease here to lubricate the grinding chamber(the grease gun and grease need to be purchased by yourself, we do not provide them). Gear oil needs to be added to the gearbox, and we have already added the oil. (LCKC150 # 200 # gear oil)
BulletPoint4 : Reducer: This reducer has been lubricated before leaving the factory. Before use, please confirm that the lubricating oil is above the center point. After the first 85 hours of operation, the lubricating oil needs to be replaced. From now on, the lubricating oil should be changed every 2500 hours and the oil level should be checked regularly
BulletPoint5 : Note: This machine has no plug and needs to be connected to the air switch for use by the customer (we have a video of the wiring, if you can't wire it, you can contact us for a video reference)
BulletPoint6 : 【Widely used】Aluminum alloy pipes for construction scaffolding, square tubes for metal stainless steel rib display racks, aluminum trays for new energy electric vehicle batteries, aluminum door and window frames, and display cabinets for refrigerators in the refrigeration industry.
Color : One Color
DrillType : drill_press
ExternallyAssignedProductIdentifier : 7509118239362
ExternallyAssignedProductIdentifier1 : 0198462644730
ExternallyAssignedProductIdentifier2 : 198462644730
IncludedComponents : Tap chuck *8
IncludedComponents1 : Pneumatic cooling spray*2
IncludedComponents2 : Solenoid valve*1
IncludedComponents3 : Air filter*1
ItemName : WYDDDARY 8MM Wood Pellet Machine with 2 Head Rollers Wood Pellet Maker Wood Pellet Mill Wood Pellet Making Machine for Corn Straw Wood Bran Sawdust Peanut Shells Rice Husks 220V 7500W
ItemPackageDimensions_Height : 44.49 inches
ItemPackageDimensions_Length : 44.49 inches
ItemPackageDimensions_Width : 25.2 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
LeagueName : /
Manufacturer : WYDDDARY
Material : iron shell + engineering plastic
MaximumRotationalSpeed : 3000 rpm
ModelName : AGAGA
ModelNumber : AGAGA
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : CD239844
PowerSourceType : air_powered
ProductDescription :

Product parameter:

voltage: 220V three-phase electricity

Power: 7500W

Production: 60KG

Wood chip particle combustion value: 3000-4300 kcal/kg.

Feed hopper inside diameter: 11in(28cm)

Feed hopper outside diameter: 12.2in(31cm)

Depth of feeding hopper: 8.3in(21cm)

Outlet size: 8.46in*4.33in(21.5*11cm)

Note:

1.This machine is 220V three-phase, please pay attention to wiring issues when using it.

2.Before starting the machine, open the upper shell of the particle machine to determine if the nut above the pressure roller is secure. If there is any looseness, use a wrench to tighten it.

3.After connecting the power supply, turn on the machine to check if the rotation direction of the pressure roller is correct (counterclockwise direction).

4.Before starting the machine, please check whether the oil level inside the box meets the requirements and ensure that it is at the normal oil level (two-thirds of the oil mirror).

5.Check the oil temperature after 10 minutes of load operation, and the temperature rise should not exceed 50 ℃.

6.Please carry out daily maintenance and do not accumulate dust and oil stains on the outer frame of the gearbox to avoid affecting heat dissipation.

7.Remove the rubber ring from the brass vent nut before starting.

8.Replace the LCKC150#200# gear oil after 500 hours of use for the first oil change.

ProductSiteLaunchDate : 2024-12-14T02:29:43.344Z
Size : One Size
Style : CNC Router Machine TTC450 Pro with Dust Collector
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TeamName : /
UnitCount : 1
UnspscCode : 27112700
Voltage : 220 volts
Wattage : 1200 watts