WAAZVXS CNC Spindle Motor 2.2kw ER20 Flange Air Cooled Spindle 220V/380V 4 Bearing 400Hz 24000RPM for CNC Router Engraving (Color : 2.2kw ER20 380V)

Imported from USA | Ships in 10 working days

5% instant discount on non COD

1

₹ 99500/-

The price at cart2india.com is inclusive of custom duties, GST, freight forwarding and other charges.

Free Shipping across India. Powered by BlueDart

Product Information


Specification
Artist : Artist
Brand : WAAZVXS
BulletPoint1 : Model Number: JGF-2.2kw
BulletPoint2 : Chuck: ER20
BulletPoint3 : Drive: Motor
BulletPoint4 : Operating Speed: 24000rpm
BulletPoint5 : Application: Milling
Color : 2.2kw ER20 380V
ExternallyAssignedProductIdentifier : 7557791680964
FinishType : Finish
Horsepower : 2.2 kilowatts
IncludedComponents : inc
ItemName : WAAZVXS CNC Spindle Motor 2.2kw ER20 Flange Air Cooled Spindle 220V/380V 4 Bearing 400Hz 24000RPM for CNC Router Engraving (Color : 2.2kw ER20 380V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : power-milling-machines
Manufacturer : WEIWEIBEIER
Material : Metal
MediaType : ArtworkMedium
ModelName : WWBR
ModelNumber : WWBR
NumberOfItems : 1
PartNumber : WWBR
PowerSourceType : PowerSource
ProductDescription : Size: 184x84x82mmSpeed regulation mode: Change the spindle speed by three-phase output inverter and adjusting the frequency of the inverter.Cooling method: air coolingPower interface: Optional 5-pin waterproof aviation plug. Aviation plugs are marked with "1", "2", "3", "4", "5", "GND". "1", "2", and "3" are connected to the inverter (U, V, W), and "GND" is connected to the inverter ground. )Power: 2.2kw (1HP=0.735w)Voltage: 220v (please leave a message if you need a 380v spindle, thank you)Current: 4.6AFrequency: 0-400HzSpeed: 0-24000rpmJump close: less than 0.01mmBearing type:4 ball bearingChuck: ER20Clamping tool diameter: 13mm、12.7mm、12mm、11mm、10mm, 9mm, 8mm, 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3.0mm, 2.5mm, 2mm, 1.5mm, 1mmGrease lubricationMain application: Carving wood, PCB, PVC, PMMA, plastic, two-color board (ABS) and other non-metals, and also can carve soft metal surfaces such as gold, silver, copper, aluminum, and lead. (Please note that this is a woodworking spindle, which can only be used for woodworking and aluminumwork, not for steelwork. If you need steelwork, please check the metal spindle, thank you!)
ProductSiteLaunchDate : 2024-04-24T06:50:31.925Z
Size : One Size
Speed : 24000 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
TheatricalReleaseDate : 2024-04-24T12:17:45.000-07:00
UnitCount : 1
Voltage : 380 volts

Questions & Answers

Have a question? Ask experts

?
No question found

Ratings & Review

Rating Breakdown (average)

5*
0
4*
0
3*
0
2*
0
1*
0

No reviews found.

Have an opinion on this page? Let's hear it.